100 Series Acrylonitrile Butadiene Styrene (ABS) and Steel Case Dry Pressure Gauges
*PRODUCT IMAGE IS REPRESENTATIVE PROVIDED BY THE MANUFACTURER. DO NOT MAKE BUYING DECISIONS SOLEY BASED ON THE IMAGE. PLEASE VERIFY SPECIFICATIONS MEET YOUR REQUIREMENTS.
Accurate and reliable general purpose dry gauge with vacuum & compound ranges, and ABS or Steel case. Ideal for applications including hydraulics, pneumatics, medical, pumps, compressors, refrigeration controls and more.
Multiple connection options are available including panel mount. A wide variety of pressure ranges, scale options, connections sizes, and options including flanges, case options, cover rings, lens materials, pointers, and orifices are also available.
Cleaning for Oxygen Service (O2) is available only for dry or HL (Halocarbon) filled gauges.
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
General purpose non-fillable dry gauge
Vacuum and compound ranges through 0 psi to 15,000 psi
Standard impact-resistant ABS & Steel case
Copper alloy and Brass wetted parts
Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
The pressure gauges must be operated within the following working pressure limits:
Dynamic Pressure application, 60% of the dial range
Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range
The gauges must be operated within specified ambient temperature ranges
Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
1
NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.
Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
101-MFB, 1/8" National Pipe Thread (NPT), Male x Female, Brass, 0.172" Orifice Hard Seat Mini Valve 101-MFC, 1/8" National Pipe Thread (NPT), Male x Female, Steel, 0.172" Orifice Hard Seat Mini Valve 101-MFS, 1/8" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve
Protect the instrument from the damaging effects of high temperature steam
Recommended for use in all steam applications
Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3,800 psi at 850 ºF
0 to 100 psi
NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.
Temperature ratings: 15,000 psi at 200 ºF and 3,000 psi at 1,000 ºF
Used with gauges and gauge valves to adjust the line of sight
Rotates 360º to allow the connected instrument to be positioned in the desired direction
The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
All 316 Stainless Steel construction
Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
Also available with 1/4" NPT connections, same specifications apply
Weight approximately 0.8 lb.
1/8 in
-20 to 60
-4 to 140
0 to 100 psi
Resist clogging and are self-cleaning
Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
Cost effective solution to protect expensive instrumentation
Increases gauge readability by smoothing out pressure surges, pulsations and spikes
5 basic elements available for each snubber to accommodate specific application needs
Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
Exotic materials or intermediate disc grades available
Provides long service life with no moving parts to wear out
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2
Available
Red Set Pointer (SP)
10-32-UNF-2B (10-32)
Orifice - Brass Press Fit Sintered, 20 Micron (CPO)
Orifice - Brass Press Fit 0.1 mm (BP1)
Orifice - Brass Press Fit 0.3 mm (BP3) - Standard
Orifice - Brass Press Fit 0.8 mm (BP8)
Laser Marking (LM)
Stainless Steel Tagging (ST)
Certificates
Certified Calibration (CC)
Cleaning for Oxygen Service (O2), Up to 1,000 psi
Cleaning for Oxygen Service (O2), 1,500 psi and up
Consult Factory
Black Steel Case (BSC)
Chrome Case (CRC)
Stainless Steel Case (SSC)
Silicone Dampened Movement (SDM)
Glass Lens (GL) (A Steel, Stainless or Chrome Case & Cover Ring must be additionally ordered when Lenses other than acrylic are utilized on all 100 Series Models)
Chrome Front Flange (SCFF) Steel Case
Black Front Flange (SBFF) Steel Case
Black Cover Ring (BCR)
Stainless Steel Cover Ring (SSCR)
Chrome Cover Ring (CCR)
±2.5% Full Scale
NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.
Copper Alloy Bourdon Tube
<ul><li>Certificate of Cleaning (COCL)</li><li>Certificate of Conformance (COC)</li></ul>
Dry Pressure Gauge
1/8" NPT
White background with black primary scale & red secondary scale. UV resistant.
100
Molded Plastic
Acrylonitrile Butadiene Styrene (ABS)
Brass & nylon, or all-brass with highly polished bearing surfaces
Acrylonitrile Butadiene Styrene (ABS), Back Connection
Inch
ABS
1/8 in National Pipe Thread (NPT)
White background with black primary scale & red secondary scale. UV resistant.
0 to 100
Back
Acrylic
National Pipe Thread (NPT)
psi/kPa Dual Scale
1-1/2
Brass
-40 to 60
-40 to 140
Built-in bezel, molded as an integral part of the case for ease of panel mounting.
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
General purpose non-fillable dry gauge
Vacuum and compound ranges through 0 psi to 15,000 psi
Standard impact-resistant ABS & Steel case
Copper alloy and Brass wetted parts
Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
The pressure gauges must be operated within the following working pressure limits:
Dynamic Pressure application, 60% of the dial range
Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range
The gauges must be operated within specified ambient temperature ranges
Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
1
NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.
Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
101-MFB, 1/8" National Pipe Thread (NPT), Male x Female, Brass, 0.172" Orifice Hard Seat Mini Valve 101-MFC, 1/8" National Pipe Thread (NPT), Male x Female, Steel, 0.172" Orifice Hard Seat Mini Valve 101-MFS, 1/8" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve
Protect the instrument from the damaging effects of high temperature steam
Recommended for use in all steam applications
Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3,800 psi at 850 ºF
0 to 160 psi
NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.
Temperature ratings: 15,000 psi at 200 ºF and 3,000 psi at 1,000 ºF
Used with gauges and gauge valves to adjust the line of sight
Rotates 360º to allow the connected instrument to be positioned in the desired direction
The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
All 316 Stainless Steel construction
Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
Also available with 1/4" NPT connections, same specifications apply
Weight approximately 0.8 lb.
1/8 in
-20 to 60
-4 to 140
0 to 160 psi
Resist clogging and are self-cleaning
Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
Cost effective solution to protect expensive instrumentation
Increases gauge readability by smoothing out pressure surges, pulsations and spikes
5 basic elements available for each snubber to accommodate specific application needs
Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
Exotic materials or intermediate disc grades available
Provides long service life with no moving parts to wear out
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2
Available
Red Set Pointer (SP)
10-32-UNF-2B (10-32)
Orifice - Brass Press Fit Sintered, 20 Micron (CPO)
Orifice - Brass Press Fit 0.1 mm (BP1)
Orifice - Brass Press Fit 0.3 mm (BP3) - Standard
Orifice - Brass Press Fit 0.8 mm (BP8)
Laser Marking (LM)
Stainless Steel Tagging (ST)
Certificates
Certified Calibration (CC)
Cleaning for Oxygen Service (O2), Up to 1,000 psi
Cleaning for Oxygen Service (O2), 1,500 psi and up
Consult Factory
Black Steel Case (BSC)
Chrome Case (CRC)
Stainless Steel Case (SSC)
Silicone Dampened Movement (SDM)
Glass Lens (GL) (A Steel, Stainless or Chrome Case & Cover Ring must be additionally ordered when Lenses other than acrylic are utilized on all 100 Series Models)
Chrome Front Flange (SCFF) Steel Case
Black Front Flange (SBFF) Steel Case
Black Cover Ring (BCR)
Stainless Steel Cover Ring (SSCR)
Chrome Cover Ring (CCR)
±2.5% Full Scale
NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.
Copper Alloy Bourdon Tube
<ul><li>Certificate of Cleaning (COCL)</li><li>Certificate of Conformance (COC)</li></ul>
Dry Pressure Gauge
1/8" NPT
White background with black primary scale & red secondary scale. UV resistant.
100
Molded Plastic
Acrylonitrile Butadiene Styrene (ABS)
Brass & nylon, or all-brass with highly polished bearing surfaces
Acrylonitrile Butadiene Styrene (ABS), Back Connection
Inch
ABS
1/8 in National Pipe Thread (NPT)
White background with black primary scale & red secondary scale. UV resistant.
0 to 160
Back
Acrylic
National Pipe Thread (NPT)
psi/kPa Dual Scale
1-1/2
Brass
-40 to 60
-40 to 140
Built-in bezel, molded as an integral part of the case for ease of panel mounting.
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
General purpose non-fillable dry gauge
Vacuum and compound ranges through 0 psi to 15,000 psi
Standard impact-resistant ABS & Steel case
Copper alloy and Brass wetted parts
Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
The pressure gauges must be operated within the following working pressure limits:
Dynamic Pressure application, 60% of the dial range
Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range
The gauges must be operated within specified ambient temperature ranges
Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
1
NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.
Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
101-MFB, 1/8" National Pipe Thread (NPT), Male x Female, Brass, 0.172" Orifice Hard Seat Mini Valve 101-MFC, 1/8" National Pipe Thread (NPT), Male x Female, Steel, 0.172" Orifice Hard Seat Mini Valve 101-MFS, 1/8" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve
Protect the instrument from the damaging effects of high temperature steam
Recommended for use in all steam applications
Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3,800 psi at 850 ºF
0 to 30 psi
NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.
Temperature ratings: 15,000 psi at 200 ºF and 3,000 psi at 1,000 ºF
Used with gauges and gauge valves to adjust the line of sight
Rotates 360º to allow the connected instrument to be positioned in the desired direction
The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
All 316 Stainless Steel construction
Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
Also available with 1/4" NPT connections, same specifications apply
Weight approximately 0.8 lb.
1/8 in
-20 to 60
-4 to 140
0 to 30 psi
Resist clogging and are self-cleaning
Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
Cost effective solution to protect expensive instrumentation
Increases gauge readability by smoothing out pressure surges, pulsations and spikes
5 basic elements available for each snubber to accommodate specific application needs
Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
Exotic materials or intermediate disc grades available
Provides long service life with no moving parts to wear out
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2
Available
Red Set Pointer (SP)
10-32-UNF-2B (10-32)
Orifice - Brass Press Fit Sintered, 20 Micron (CPO)
Orifice - Brass Press Fit 0.1 mm (BP1)
Orifice - Brass Press Fit 0.3 mm (BP3) - Standard
Orifice - Brass Press Fit 0.8 mm (BP8)
Laser Marking (LM)
Stainless Steel Tagging (ST)
Certificates
Certified Calibration (CC)
Cleaning for Oxygen Service (O2), Up to 1,000 psi
Cleaning for Oxygen Service (O2), 1,500 psi and up
Consult Factory
Black Steel Case (BSC)
Chrome Case (CRC)
Stainless Steel Case (SSC)
Silicone Dampened Movement (SDM)
Glass Lens (GL) (A Steel, Stainless or Chrome Case & Cover Ring must be additionally ordered when Lenses other than acrylic are utilized on all 100 Series Models)
Chrome Front Flange (SCFF) Steel Case
Black Front Flange (SBFF) Steel Case
Black Cover Ring (BCR)
Stainless Steel Cover Ring (SSCR)
Chrome Cover Ring (CCR)
±2.5% Full Scale
NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.
Copper Alloy Bourdon Tube
<ul><li>Certificate of Cleaning (COCL)</li><li>Certificate of Conformance (COC)</li></ul>
Dry Pressure Gauge
1/8" NPT
White background with black primary scale & red secondary scale. UV resistant.
100
Molded Plastic
Acrylonitrile Butadiene Styrene (ABS)
Brass & nylon, or all-brass with highly polished bearing surfaces
Acrylonitrile Butadiene Styrene (ABS), Back Connection
Inch
ABS
1/8 in National Pipe Thread (NPT)
White background with black primary scale & red secondary scale. UV resistant.
0 to 30
Back
Acrylic
National Pipe Thread (NPT)
psi/kPa Dual Scale
1-1/2
Brass
-40 to 60
-40 to 140
Built-in bezel, molded as an integral part of the case for ease of panel mounting.
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
General purpose non-fillable dry gauge
Vacuum and compound ranges through 0 psi to 15,000 psi
Standard impact-resistant ABS & Steel case
Copper alloy and Brass wetted parts
Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
The pressure gauges must be operated within the following working pressure limits:
Dynamic Pressure application, 60% of the dial range
Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range
The gauges must be operated within specified ambient temperature ranges
Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
1
NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.
Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
101-MFB, 1/8" National Pipe Thread (NPT), Male x Female, Brass, 0.172" Orifice Hard Seat Mini Valve 101-MFC, 1/8" National Pipe Thread (NPT), Male x Female, Steel, 0.172" Orifice Hard Seat Mini Valve 101-MFS, 1/8" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve
Protect the instrument from the damaging effects of high temperature steam
Recommended for use in all steam applications
Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3,800 psi at 850 ºF
0 to 30 psi
NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.
Temperature ratings: 15,000 psi at 200 ºF and 3,000 psi at 1,000 ºF
Used with gauges and gauge valves to adjust the line of sight
Rotates 360º to allow the connected instrument to be positioned in the desired direction
The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
All 316 Stainless Steel construction
Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
Also available with 1/4" NPT connections, same specifications apply
Weight approximately 0.8 lb.
1/8 in
-20 to 60
-4 to 140
0 to 30 psi
Resist clogging and are self-cleaning
Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
Cost effective solution to protect expensive instrumentation
Increases gauge readability by smoothing out pressure surges, pulsations and spikes
5 basic elements available for each snubber to accommodate specific application needs
Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
Exotic materials or intermediate disc grades available
Provides long service life with no moving parts to wear out
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2
Available
Red Set Pointer (SP)
10-32-UNF-2B (10-32)
Orifice - Brass Press Fit Sintered, 20 Micron (CPO)
Orifice - Brass Press Fit 0.1 mm (BP1)
Orifice - Brass Press Fit 0.3 mm (BP3) - Standard
Orifice - Brass Press Fit 0.8 mm (BP8)
Laser Marking (LM)
Stainless Steel Tagging (ST)
Certificates
Certified Calibration (CC)
Cleaning for Oxygen Service (O2), Up to 1,000 psi
Cleaning for Oxygen Service (O2), 1,500 psi and up
Consult Factory
Black Steel Case (BSC)
Chrome Case (CRC)
Stainless Steel Case (SSC)
Silicone Dampened Movement (SDM)
Glass Lens (GL) (A Steel, Stainless or Chrome Case & Cover Ring must be additionally ordered when Lenses other than acrylic are utilized on all 100 Series Models)
Chrome Front Flange (SCFF) Steel Case
Black Front Flange (SBFF) Steel Case
Black Cover Ring (BCR)
Stainless Steel Cover Ring (SSCR)
Chrome Cover Ring (CCR)
±2.5% Full Scale
NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.
Copper Alloy Bourdon Tube
<ul><li>Certificate of Cleaning (COCL)</li><li>Certificate of Conformance (COC)</li></ul>
Dry Pressure Gauge
1/8" NPT
White background with black primary scale & red secondary scale. UV resistant.
100
Molded Plastic
Acrylonitrile Butadiene Styrene (ABS)
Brass & nylon, or all-brass with highly polished bearing surfaces
Acrylonitrile Butadiene Styrene (ABS), Back Connection
Inch
ABS
1/8 in National Pipe Thread (NPT)
White background with black primary scale & red secondary scale. UV resistant.
0 to 30
Back
Acrylic
National Pipe Thread (NPT)
kPa Scale
1-1/2
Brass
-40 to 60
-40 to 140
Built-in bezel, molded as an integral part of the case for ease of panel mounting.
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
General purpose non-fillable dry gauge
Vacuum and compound ranges through 0 psi to 15,000 psi
Standard impact-resistant ABS & Steel case
Copper alloy and Brass wetted parts
Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
The pressure gauges must be operated within the following working pressure limits:
Dynamic Pressure application, 60% of the dial range
Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range
The gauges must be operated within specified ambient temperature ranges
Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
1
NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.
Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
102-MFB, 1/4" National Pipe Thread (NPT), Male x Female, Brass, 0.172" Orifice Hard Seat Mini Valve 102-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, 0.172" Orifice Hard Seat Mini Valve 102-MFS, 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve 602-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, Hard Seat, 0.187" Orifice Block and Bleed Valve
Protect the instrument from the damaging effects of high temperature steam
Recommended for use in all steam applications
Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3,800 psi at 850 ºF
0 to 200 psi
NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.
Temperature ratings: 15,000 psi at 200 ºF and 3,000 psi at 1,000 ºF
Used with gauges and gauge valves to adjust the line of sight
Rotates 360º to allow the connected instrument to be positioned in the desired direction
The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
All 316 Stainless Steel construction
Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
Also available with 1/4" NPT connections, same specifications apply
Weight approximately 0.8 lb.
1/4 in
-20 to 60
-4 to 140
0 to 200 psi
Resist clogging and are self-cleaning
Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
Cost effective solution to protect expensive instrumentation
Increases gauge readability by smoothing out pressure surges, pulsations and spikes
5 basic elements available for each snubber to accommodate specific application needs
Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
Exotic materials or intermediate disc grades available
Provides long service life with no moving parts to wear out
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2
Available
Red Set Pointer (SP)
10-32-UNF-2B (10-32)
Orifice - Brass Press Fit Sintered, 20 Micron (CPO)
Orifice - Brass Press Fit 0.1 mm (BP1)
Orifice - Brass Press Fit 0.3 mm (BP3) - Standard
Orifice - Brass Press Fit 0.8 mm (BP8)
Laser Marking (LM)
Stainless Steel Tagging (ST)
Certificates
Certified Calibration (CC)
Cleaning for Oxygen Service (O2), Up to 1,000 psi
Cleaning for Oxygen Service (O2), 1,500 psi and up
Consult Factory
Black Steel Case (BSC)
Chrome Case (CRC)
Stainless Steel Case (SSC)
Silicone Dampened Movement (SDM)
Glass Lens (GL) (A Steel, Stainless or Chrome Case & Cover Ring must be additionally ordered when Lenses other than acrylic are utilized on all 100 Series Models)
Chrome Front Flange (SCFF) Steel Case
Black Front Flange (SBFF) Steel Case
Black Cover Ring (BCR)
Stainless Steel Cover Ring (SSCR)
Chrome Cover Ring (CCR)
±2.5% Full Scale
NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.
Copper Alloy Bourdon Tube
<ul><li>Certificate of Cleaning (COCL)</li><li>Certificate of Conformance (COC)</li></ul>
Dry Pressure Gauge
1/4" NPT
White background with black primary scale & red secondary scale. UV resistant.
100
Molded Plastic
Acrylonitrile Butadiene Styrene (ABS)
Brass & nylon, or all-brass with highly polished bearing surfaces
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
General purpose non-fillable dry gauge
Vacuum and compound ranges through 0 psi to 15,000 psi
Standard impact-resistant ABS & Steel case
Copper alloy and Brass wetted parts
Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
The pressure gauges must be operated within the following working pressure limits:
Dynamic Pressure application, 60% of the dial range
Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range
The gauges must be operated within specified ambient temperature ranges
Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
1
NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.
Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
102-MFB, 1/4" National Pipe Thread (NPT), Male x Female, Brass, 0.172" Orifice Hard Seat Mini Valve 102-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, 0.172" Orifice Hard Seat Mini Valve 102-MFS, 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve 602-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, Hard Seat, 0.187" Orifice Block and Bleed Valve
Protect the instrument from the damaging effects of high temperature steam
Recommended for use in all steam applications
Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3,800 psi at 850 ºF
0 to 100 psi
NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.
Temperature ratings: 15,000 psi at 200 ºF and 3,000 psi at 1,000 ºF
Used with gauges and gauge valves to adjust the line of sight
Rotates 360º to allow the connected instrument to be positioned in the desired direction
The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
All 316 Stainless Steel construction
Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
Also available with 1/4" NPT connections, same specifications apply
Weight approximately 0.8 lb.
1/4 in
-20 to 60
-4 to 140
0 to 100 psi
Resist clogging and are self-cleaning
Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
Cost effective solution to protect expensive instrumentation
Increases gauge readability by smoothing out pressure surges, pulsations and spikes
5 basic elements available for each snubber to accommodate specific application needs
Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
Exotic materials or intermediate disc grades available
Provides long service life with no moving parts to wear out
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2
Available
Red Set Pointer (SP)
10-32-UNF-2B (10-32)
Orifice - Brass Press Fit Sintered, 20 Micron (CPO)
Orifice - Brass Press Fit 0.1 mm (BP1)
Orifice - Brass Press Fit 0.3 mm (BP3) - Standard
Orifice - Brass Press Fit 0.8 mm (BP8)
Laser Marking (LM)
Stainless Steel Tagging (ST)
Certificates
Certified Calibration (CC)
Cleaning for Oxygen Service (O2), Up to 1,000 psi
Cleaning for Oxygen Service (O2), 1,500 psi and up
Consult Factory
Black Steel Case (BSC)
Chrome Case (CRC)
Stainless Steel Case (SSC)
Silicone Dampened Movement (SDM)
Glass Lens (GL) (A Steel, Stainless or Chrome Case & Cover Ring must be additionally ordered when Lenses other than acrylic are utilized on all 100 Series Models)
Chrome Front Flange (SCFF) Steel Case
Black Front Flange (SBFF) Steel Case
Black Cover Ring (BCR)
Stainless Steel Cover Ring (SSCR)
Chrome Cover Ring (CCR)
±2.5% Full Scale
NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.
Copper Alloy Bourdon Tube
<ul><li>Certificate of Cleaning (COCL)</li><li>Certificate of Conformance (COC)</li></ul>
Dry Pressure Gauge
1/4" NPT
White background with black primary scale & red secondary scale. UV resistant.
100
Molded Plastic
Acrylonitrile Butadiene Styrene (ABS)
Brass & nylon, or all-brass with highly polished bearing surfaces
Acrylonitrile Butadiene Styrene (ABS), Back Connection
Inch
ABS
1/4 in National Pipe Thread (NPT)
White background with black primary scale & red secondary scale. UV resistant.
0 to 100
Back
Acrylic
National Pipe Thread (NPT)
psi/kPa Dual Scale
2
Brass
-40 to 60
-40 to 140
Built-in bezel, molded as an integral part of the case for ease of panel mounting.
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
General purpose non-fillable dry gauge
Vacuum and compound ranges through 0 psi to 15,000 psi
Standard impact-resistant ABS & Steel case
Copper alloy and Brass wetted parts
Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
The pressure gauges must be operated within the following working pressure limits:
Dynamic Pressure application, 60% of the dial range
Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range
The gauges must be operated within specified ambient temperature ranges
Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
1
NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.
Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
102-MFB, 1/4" National Pipe Thread (NPT), Male x Female, Brass, 0.172" Orifice Hard Seat Mini Valve 102-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, 0.172" Orifice Hard Seat Mini Valve 102-MFS, 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve 602-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, Hard Seat, 0.187" Orifice Block and Bleed Valve
Protect the instrument from the damaging effects of high temperature steam
Recommended for use in all steam applications
Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3,800 psi at 850 ºF
0 to 160 psi
NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.
Temperature ratings: 15,000 psi at 200 ºF and 3,000 psi at 1,000 ºF
Used with gauges and gauge valves to adjust the line of sight
Rotates 360º to allow the connected instrument to be positioned in the desired direction
The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
All 316 Stainless Steel construction
Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
Also available with 1/4" NPT connections, same specifications apply
Weight approximately 0.8 lb.
1/4 in
-20 to 60
-4 to 140
0 to 160 psi
Resist clogging and are self-cleaning
Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
Cost effective solution to protect expensive instrumentation
Increases gauge readability by smoothing out pressure surges, pulsations and spikes
5 basic elements available for each snubber to accommodate specific application needs
Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
Exotic materials or intermediate disc grades available
Provides long service life with no moving parts to wear out
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2
Available
Red Set Pointer (SP)
10-32-UNF-2B (10-32)
Orifice - Brass Press Fit Sintered, 20 Micron (CPO)
Orifice - Brass Press Fit 0.1 mm (BP1)
Orifice - Brass Press Fit 0.3 mm (BP3) - Standard
Orifice - Brass Press Fit 0.8 mm (BP8)
Laser Marking (LM)
Stainless Steel Tagging (ST)
Certificates
Certified Calibration (CC)
Cleaning for Oxygen Service (O2), Up to 1,000 psi
Cleaning for Oxygen Service (O2), 1,500 psi and up
Consult Factory
Black Steel Case (BSC)
Chrome Case (CRC)
Stainless Steel Case (SSC)
Silicone Dampened Movement (SDM)
Glass Lens (GL) (A Steel, Stainless or Chrome Case & Cover Ring must be additionally ordered when Lenses other than acrylic are utilized on all 100 Series Models)
Chrome Front Flange (SCFF) Steel Case
Black Front Flange (SBFF) Steel Case
Black Cover Ring (BCR)
Stainless Steel Cover Ring (SSCR)
Chrome Cover Ring (CCR)
±2.5% Full Scale
NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.
Copper Alloy Bourdon Tube
<ul><li>Certificate of Cleaning (COCL)</li><li>Certificate of Conformance (COC)</li></ul>
Dry Pressure Gauge
1/4" NPT
White background with black primary scale & red secondary scale. UV resistant.
100
Molded Plastic
Acrylonitrile Butadiene Styrene (ABS)
Brass & nylon, or all-brass with highly polished bearing surfaces
Acrylonitrile Butadiene Styrene (ABS), Back Connection
Inch
ABS
1/4 in National Pipe Thread (NPT)
White background with black primary scale & red secondary scale. UV resistant.
0 to 160
Back
Acrylic
National Pipe Thread (NPT)
psi/bar Dual Scale
2
Brass
-40 to 60
-40 to 140
Built-in bezel, molded as an integral part of the case for ease of panel mounting.
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
General purpose non-fillable dry gauge
Vacuum and compound ranges through 0 psi to 15,000 psi
Standard impact-resistant ABS & Steel case
Copper alloy and Brass wetted parts
Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
The pressure gauges must be operated within the following working pressure limits:
Dynamic Pressure application, 60% of the dial range
Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range
The gauges must be operated within specified ambient temperature ranges
Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
1
NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.
Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
102-MFB, 1/4" National Pipe Thread (NPT), Male x Female, Brass, 0.172" Orifice Hard Seat Mini Valve 102-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, 0.172" Orifice Hard Seat Mini Valve 102-MFS, 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve 602-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, Hard Seat, 0.187" Orifice Block and Bleed Valve
Protect the instrument from the damaging effects of high temperature steam
Recommended for use in all steam applications
Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3,800 psi at 850 ºF
0 to 200 psi
NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.
Temperature ratings: 15,000 psi at 200 ºF and 3,000 psi at 1,000 ºF
Used with gauges and gauge valves to adjust the line of sight
Rotates 360º to allow the connected instrument to be positioned in the desired direction
The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
All 316 Stainless Steel construction
Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
Also available with 1/4" NPT connections, same specifications apply
Weight approximately 0.8 lb.
1/4 in
-20 to 60
-4 to 140
0 to 200 psi
Resist clogging and are self-cleaning
Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
Cost effective solution to protect expensive instrumentation
Increases gauge readability by smoothing out pressure surges, pulsations and spikes
5 basic elements available for each snubber to accommodate specific application needs
Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
Exotic materials or intermediate disc grades available
Provides long service life with no moving parts to wear out
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2
Available
Red Set Pointer (SP)
10-32-UNF-2B (10-32)
Orifice - Brass Press Fit Sintered, 20 Micron (CPO)
Orifice - Brass Press Fit 0.1 mm (BP1)
Orifice - Brass Press Fit 0.3 mm (BP3) - Standard
Orifice - Brass Press Fit 0.8 mm (BP8)
Laser Marking (LM)
Stainless Steel Tagging (ST)
Certificates
Certified Calibration (CC)
Cleaning for Oxygen Service (O2), Up to 1,000 psi
Cleaning for Oxygen Service (O2), 1,500 psi and up
Consult Factory
Black Steel Case (BSC)
Chrome Case (CRC)
Stainless Steel Case (SSC)
Silicone Dampened Movement (SDM)
Glass Lens (GL) (A Steel, Stainless or Chrome Case & Cover Ring must be additionally ordered when Lenses other than acrylic are utilized on all 100 Series Models)
Chrome Front Flange (SCFF) Steel Case
Black Front Flange (SBFF) Steel Case
Black Cover Ring (BCR)
Stainless Steel Cover Ring (SSCR)
Chrome Cover Ring (CCR)
±2.5% Full Scale
NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.
Copper Alloy Bourdon Tube
<ul><li>Certificate of Cleaning (COCL)</li><li>Certificate of Conformance (COC)</li></ul>
Dry Pressure Gauge
1/4" NPT
White background with black primary scale & red secondary scale. UV resistant.
100
Molded Plastic
Acrylonitrile Butadiene Styrene (ABS)
Brass & nylon, or all-brass with highly polished bearing surfaces
Acrylonitrile Butadiene Styrene (ABS), Back Connection
Inch
ABS
1/4 in National Pipe Thread (NPT)
White background with black primary scale & red secondary scale. UV resistant.
0 to 200
Back
Acrylic
National Pipe Thread (NPT)
psi/kPa Dual Scale
2
Brass
-40 to 60
-40 to 140
Built-in bezel, molded as an integral part of the case for ease of panel mounting.
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
General purpose non-fillable dry gauge
Vacuum and compound ranges through 0 psi to 15,000 psi
Standard impact-resistant ABS & Steel case
Copper alloy and Brass wetted parts
Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
The pressure gauges must be operated within the following working pressure limits:
Dynamic Pressure application, 60% of the dial range
Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range
The gauges must be operated within specified ambient temperature ranges
Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
1
NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.
Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
102-MFB, 1/4" National Pipe Thread (NPT), Male x Female, Brass, 0.172" Orifice Hard Seat Mini Valve 102-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, 0.172" Orifice Hard Seat Mini Valve 102-MFS, 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve 602-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, Hard Seat, 0.187" Orifice Block and Bleed Valve
Protect the instrument from the damaging effects of high temperature steam
Recommended for use in all steam applications
Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3,800 psi at 850 ºF
0 to 30 psi
NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.
Temperature ratings: 15,000 psi at 200 ºF and 3,000 psi at 1,000 ºF
Used with gauges and gauge valves to adjust the line of sight
Rotates 360º to allow the connected instrument to be positioned in the desired direction
The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
All 316 Stainless Steel construction
Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
Also available with 1/4" NPT connections, same specifications apply
Weight approximately 0.8 lb.
1/4 in
-20 to 60
-4 to 140
0 to 30 psi
Resist clogging and are self-cleaning
Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
Cost effective solution to protect expensive instrumentation
Increases gauge readability by smoothing out pressure surges, pulsations and spikes
5 basic elements available for each snubber to accommodate specific application needs
Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
Exotic materials or intermediate disc grades available
Provides long service life with no moving parts to wear out
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2
Available
Red Set Pointer (SP)
10-32-UNF-2B (10-32)
Orifice - Brass Press Fit Sintered, 20 Micron (CPO)
Orifice - Brass Press Fit 0.1 mm (BP1)
Orifice - Brass Press Fit 0.3 mm (BP3) - Standard
Orifice - Brass Press Fit 0.8 mm (BP8)
Laser Marking (LM)
Stainless Steel Tagging (ST)
Certificates
Certified Calibration (CC)
Cleaning for Oxygen Service (O2), Up to 1,000 psi
Cleaning for Oxygen Service (O2), 1,500 psi and up
Consult Factory
Black Steel Case (BSC)
Chrome Case (CRC)
Stainless Steel Case (SSC)
Silicone Dampened Movement (SDM)
Glass Lens (GL) (A Steel, Stainless or Chrome Case & Cover Ring must be additionally ordered when Lenses other than acrylic are utilized on all 100 Series Models)
Chrome Front Flange (SCFF) Steel Case
Black Front Flange (SBFF) Steel Case
Black Cover Ring (BCR)
Stainless Steel Cover Ring (SSCR)
Chrome Cover Ring (CCR)
±2.5% Full Scale
NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.
Copper Alloy Bourdon Tube
<ul><li>Certificate of Cleaning (COCL)</li><li>Certificate of Conformance (COC)</li></ul>
Dry Pressure Gauge
1/4" NPT
White background with black primary scale & red secondary scale. UV resistant.
100
Molded Plastic
Acrylonitrile Butadiene Styrene (ABS)
Brass & nylon, or all-brass with highly polished bearing surfaces
Acrylonitrile Butadiene Styrene (ABS), Back Connection
Inch
ABS
1/4 in National Pipe Thread (NPT)
White background with black primary scale & red secondary scale. UV resistant.
0 to 30
Back
Acrylic
National Pipe Thread (NPT)
psi/kPa Dual Scale
2
Brass
-40 to 60
-40 to 140
Built-in bezel, molded as an integral part of the case for ease of panel mounting.
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
General purpose non-fillable dry gauge
Vacuum and compound ranges through 0 psi to 15,000 psi
Standard impact-resistant ABS & Steel case
Copper alloy and Brass wetted parts
Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
The pressure gauges must be operated within the following working pressure limits:
Dynamic Pressure application, 60% of the dial range
Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range
The gauges must be operated within specified ambient temperature ranges
Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
1
NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.
Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
101-MFB, 1/8" National Pipe Thread (NPT), Male x Female, Brass, 0.172" Orifice Hard Seat Mini Valve 101-MFC, 1/8" National Pipe Thread (NPT), Male x Female, Steel, 0.172" Orifice Hard Seat Mini Valve 101-MFS, 1/8" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve
Protect the instrument from the damaging effects of high temperature steam
Recommended for use in all steam applications
Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3,800 psi at 850 ºF
0 to 30 psi
NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.
Temperature ratings: 15,000 psi at 200 ºF and 3,000 psi at 1,000 ºF
Used with gauges and gauge valves to adjust the line of sight
Rotates 360º to allow the connected instrument to be positioned in the desired direction
The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
All 316 Stainless Steel construction
Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
Also available with 1/4" NPT connections, same specifications apply
Weight approximately 0.8 lb.
1/8 in
-20 to 60
-4 to 140
0 to 30 psi
Resist clogging and are self-cleaning
Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
Cost effective solution to protect expensive instrumentation
Increases gauge readability by smoothing out pressure surges, pulsations and spikes
5 basic elements available for each snubber to accommodate specific application needs
Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
Exotic materials or intermediate disc grades available
Provides long service life with no moving parts to wear out
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2
Available
Red Set Pointer (SP)
10-32-UNF-2B (10-32)
Orifice - Brass Press Fit Sintered, 20 Micron (CPO)
Orifice - Brass Press Fit 0.1 mm (BP1)
Orifice - Brass Press Fit 0.3 mm (BP3) - Standard
Orifice - Brass Press Fit 0.8 mm (BP8)
Laser Marking (LM)
Stainless Steel Tagging (ST)
Certificates
Certified Calibration (CC)
Cleaning for Oxygen Service (O2), Up to 1,000 psi
Cleaning for Oxygen Service (O2), 1,500 psi and up
Consult Factory
Black Steel Case (BSC)
Chrome Case (CRC)
Stainless Steel Case (SSC)
Silicone Dampened Movement (SDM)
Glass Lens (GL) (A Steel, Stainless or Chrome Case & Cover Ring must be additionally ordered when Lenses other than acrylic are utilized on all 100 Series Models)
Chrome Front Flange (SCFF) Steel Case
Black Front Flange (SBFF) Steel Case
Black Cover Ring (BCR)
Stainless Steel Cover Ring (SSCR)
Chrome Cover Ring (CCR)
±2.5% Full Scale
NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.
Copper Alloy Bourdon Tube
<ul><li>Certificate of Cleaning (COCL)</li><li>Certificate of Conformance (COC)</li></ul>
Dry Pressure Gauge
1/8" NPT
White background with black primary scale & red secondary scale. UV resistant.
100
Molded Plastic
Acrylonitrile Butadiene Styrene (ABS)
Brass & nylon, or all-brass with highly polished bearing surfaces
Acrylonitrile Butadiene Styrene (ABS), Back Connection
Inch
ABS
1/8 in National Pipe Thread (NPT)
White background with black primary scale & red secondary scale. UV resistant.
0 to 30
Back
Acrylic
National Pipe Thread (NPT)
psi/kPa Dual Scale
2
Brass
-40 to 60
-40 to 140
Built-in bezel, molded as an integral part of the case for ease of panel mounting.
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
General purpose non-fillable dry gauge
Vacuum and compound ranges through 0 psi to 15,000 psi
Standard impact-resistant ABS & Steel case
Copper alloy and Brass wetted parts
Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
The pressure gauges must be operated within the following working pressure limits:
Dynamic Pressure application, 60% of the dial range
Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range
The gauges must be operated within specified ambient temperature ranges
Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
1
NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.
Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
102-MFB, 1/4" National Pipe Thread (NPT), Male x Female, Brass, 0.172" Orifice Hard Seat Mini Valve 102-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, 0.172" Orifice Hard Seat Mini Valve 102-MFS, 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve 602-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, Hard Seat, 0.187" Orifice Block and Bleed Valve
Protect the instrument from the damaging effects of high temperature steam
Recommended for use in all steam applications
Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3,800 psi at 850 ºF
0 to 160 psi
NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.
Temperature ratings: 15,000 psi at 200 ºF and 3,000 psi at 1,000 ºF
Used with gauges and gauge valves to adjust the line of sight
Rotates 360º to allow the connected instrument to be positioned in the desired direction
The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
All 316 Stainless Steel construction
Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
Also available with 1/4" NPT connections, same specifications apply
Weight approximately 0.8 lb.
1/4 in
-20 to 60
-4 to 140
0 to 160 psi
Resist clogging and are self-cleaning
Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
Cost effective solution to protect expensive instrumentation
Increases gauge readability by smoothing out pressure surges, pulsations and spikes
5 basic elements available for each snubber to accommodate specific application needs
Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
Exotic materials or intermediate disc grades available
Provides long service life with no moving parts to wear out
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2
Available
Red Set Pointer (SP)
10-32-UNF-2B (10-32)
Orifice - Brass Press Fit Sintered, 20 Micron (CPO)
Orifice - Brass Press Fit 0.1 mm (BP1)
Orifice - Brass Press Fit 0.3 mm (BP3) - Standard
Orifice - Brass Press Fit 0.8 mm (BP8)
Laser Marking (LM)
Stainless Steel Tagging (ST)
Certificates
Certified Calibration (CC)
Cleaning for Oxygen Service (O2), Up to 1,000 psi
Cleaning for Oxygen Service (O2), 1,500 psi and up
Consult Factory
Black Steel Case (BSC)
Chrome Case (CRC)
Stainless Steel Case (SSC)
Silicone Dampened Movement (SDM)
Glass Lens (GL) (A Steel, Stainless or Chrome Case & Cover Ring must be additionally ordered when Lenses other than acrylic are utilized on all 100 Series Models)
Chrome Front Flange (SCFF) Steel Case
Black Front Flange (SBFF) Steel Case
Black Cover Ring (BCR)
Stainless Steel Cover Ring (SSCR)
Chrome Cover Ring (CCR)
±2.5% Full Scale
NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.
Copper Alloy Bourdon Tube
<ul><li>Certificate of Cleaning (COCL)</li><li>Certificate of Conformance (COC)</li></ul>
Dry Pressure Gauge
1/4" NPT
White background with black primary scale & red secondary scale. UV resistant.
100
Molded Plastic
Acrylonitrile Butadiene Styrene (ABS)
Brass & nylon, or all-brass with highly polished bearing surfaces
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
General purpose non-fillable dry gauge
Vacuum and compound ranges through 0 psi to 15,000 psi
Standard impact-resistant ABS & Steel case
Copper alloy and Brass wetted parts
Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
The pressure gauges must be operated within the following working pressure limits:
Dynamic Pressure application, 60% of the dial range
Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range
The gauges must be operated within specified ambient temperature ranges
Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
1
NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.
Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
102-MFB, 1/4" National Pipe Thread (NPT), Male x Female, Brass, 0.172" Orifice Hard Seat Mini Valve 102-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, 0.172" Orifice Hard Seat Mini Valve 102-MFS, 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve 602-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, Hard Seat, 0.187" Orifice Block and Bleed Valve
Protect the instrument from the damaging effects of high temperature steam
Recommended for use in all steam applications
Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3,800 psi at 850 ºF
0 to 2,000 psi
NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.
Temperature ratings: 15,000 psi at 200 ºF and 3,000 psi at 1,000 ºF
Used with gauges and gauge valves to adjust the line of sight
Rotates 360º to allow the connected instrument to be positioned in the desired direction
The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
All 316 Stainless Steel construction
Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
Also available with 1/4" NPT connections, same specifications apply
Weight approximately 0.8 lb.
1/4 in
-20 to 60
-4 to 140
0 to 2,000 psi
Resist clogging and are self-cleaning
Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
Cost effective solution to protect expensive instrumentation
Increases gauge readability by smoothing out pressure surges, pulsations and spikes
5 basic elements available for each snubber to accommodate specific application needs
Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
Exotic materials or intermediate disc grades available
Provides long service life with no moving parts to wear out
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2
Available
Red Set Pointer (SP)
10-32-UNF-2B (10-32)
Orifice - Brass Press Fit Sintered, 20 Micron (CPO)
Orifice - Brass Press Fit 0.1 mm (BP1)
Orifice - Brass Press Fit 0.3 mm (BP3) - Standard
Orifice - Brass Press Fit 0.8 mm (BP8)
Laser Marking (LM)
Stainless Steel Tagging (ST)
Certificates
Certified Calibration (CC)
Cleaning for Oxygen Service (O2), Up to 1,000 psi
Cleaning for Oxygen Service (O2), 1,500 psi and up
Consult Factory
Black Steel Case (BSC)
Chrome Case (CRC)
Stainless Steel Case (SSC)
Silicone Dampened Movement (SDM)
Glass Lens (GL) (A Steel, Stainless or Chrome Case & Cover Ring must be additionally ordered when Lenses other than acrylic are utilized on all 100 Series Models)
Chrome Front Flange (SCFF) Steel Case
Black Front Flange (SBFF) Steel Case
Black Cover Ring (BCR)
Stainless Steel Cover Ring (SSCR)
Chrome Cover Ring (CCR)
±2.5% Full Scale
NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.
Copper Alloy Bourdon Tube
<ul><li>Certificate of Cleaning (COCL)</li><li>Certificate of Conformance (COC)</li></ul>
Dry Pressure Gauge
1/4" NPT
White background with black primary scale & red secondary scale. UV resistant.
100
Molded Plastic
Acrylonitrile Butadiene Styrene (ABS)
Brass & nylon, or all-brass with highly polished bearing surfaces
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
General purpose non-fillable dry gauge
Vacuum and compound ranges through 0 psi to 15,000 psi
Standard impact-resistant ABS & Steel case
Copper alloy and Brass wetted parts
Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
The pressure gauges must be operated within the following working pressure limits:
Dynamic Pressure application, 60% of the dial range
Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range
The gauges must be operated within specified ambient temperature ranges
Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
1
NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.
Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
102-MFB, 1/4" National Pipe Thread (NPT), Male x Female, Brass, 0.172" Orifice Hard Seat Mini Valve 102-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, 0.172" Orifice Hard Seat Mini Valve 102-MFS, 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve 602-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, Hard Seat, 0.187" Orifice Block and Bleed Valve
Protect the instrument from the damaging effects of high temperature steam
Recommended for use in all steam applications
Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3,800 psi at 850 ºF
0 to 3,000 psi
NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.
Temperature ratings: 15,000 psi at 200 ºF and 3,000 psi at 1,000 ºF
Used with gauges and gauge valves to adjust the line of sight
Rotates 360º to allow the connected instrument to be positioned in the desired direction
The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
All 316 Stainless Steel construction
Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
Also available with 1/4" NPT connections, same specifications apply
Weight approximately 0.8 lb.
1/4 in
-20 to 60
-4 to 140
0 to 3,000 psi
Resist clogging and are self-cleaning
Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
Cost effective solution to protect expensive instrumentation
Increases gauge readability by smoothing out pressure surges, pulsations and spikes
5 basic elements available for each snubber to accommodate specific application needs
Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
Exotic materials or intermediate disc grades available
Provides long service life with no moving parts to wear out
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2
Available
Red Set Pointer (SP)
10-32-UNF-2B (10-32)
Orifice - Brass Press Fit Sintered, 20 Micron (CPO)
Orifice - Brass Press Fit 0.1 mm (BP1)
Orifice - Brass Press Fit 0.3 mm (BP3) - Standard
Orifice - Brass Press Fit 0.8 mm (BP8)
Laser Marking (LM)
Stainless Steel Tagging (ST)
Certificates
Certified Calibration (CC)
Cleaning for Oxygen Service (O2), Up to 1,000 psi
Cleaning for Oxygen Service (O2), 1,500 psi and up
Consult Factory
Black Steel Case (BSC)
Chrome Case (CRC)
Stainless Steel Case (SSC)
Silicone Dampened Movement (SDM)
Glass Lens (GL) (A Steel, Stainless or Chrome Case & Cover Ring must be additionally ordered when Lenses other than acrylic are utilized on all 100 Series Models)
Chrome Front Flange (SCFF) Steel Case
Black Front Flange (SBFF) Steel Case
Black Cover Ring (BCR)
Stainless Steel Cover Ring (SSCR)
Chrome Cover Ring (CCR)
±2.5% Full Scale
NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.
Copper Alloy Bourdon Tube
<ul><li>Certificate of Cleaning (COCL)</li><li>Certificate of Conformance (COC)</li></ul>
Dry Pressure Gauge
1/4" NPT
White background with black primary scale & red secondary scale. UV resistant.
100
Molded Plastic
Acrylonitrile Butadiene Styrene (ABS)
Brass & nylon, or all-brass with highly polished bearing surfaces
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
General purpose non-fillable dry gauge
Vacuum and compound ranges through 0 psi to 15,000 psi
Standard impact-resistant ABS & Steel case
Copper alloy and Brass wetted parts
Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
The pressure gauges must be operated within the following working pressure limits:
Dynamic Pressure application, 60% of the dial range
Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range
The gauges must be operated within specified ambient temperature ranges
Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
1
NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.
Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
102-MFB, 1/4" National Pipe Thread (NPT), Male x Female, Brass, 0.172" Orifice Hard Seat Mini Valve 102-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, 0.172" Orifice Hard Seat Mini Valve 102-MFS, 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve 602-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, Hard Seat, 0.187" Orifice Block and Bleed Valve
Protect the instrument from the damaging effects of high temperature steam
Recommended for use in all steam applications
Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3,800 psi at 850 ºF
0 to 30 psi
NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.
Temperature ratings: 15,000 psi at 200 ºF and 3,000 psi at 1,000 ºF
Used with gauges and gauge valves to adjust the line of sight
Rotates 360º to allow the connected instrument to be positioned in the desired direction
The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
All 316 Stainless Steel construction
Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
Also available with 1/4" NPT connections, same specifications apply
Weight approximately 0.8 lb.
1/4 in
-20 to 60
-4 to 140
0 to 30 psi
Resist clogging and are self-cleaning
Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
Cost effective solution to protect expensive instrumentation
Increases gauge readability by smoothing out pressure surges, pulsations and spikes
5 basic elements available for each snubber to accommodate specific application needs
Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
Exotic materials or intermediate disc grades available
Provides long service life with no moving parts to wear out
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2
Available
Red Set Pointer (SP)
10-32-UNF-2B (10-32)
Orifice - Brass Press Fit Sintered, 20 Micron (CPO)
Orifice - Brass Press Fit 0.1 mm (BP1)
Orifice - Brass Press Fit 0.3 mm (BP3) - Standard
Orifice - Brass Press Fit 0.8 mm (BP8)
Laser Marking (LM)
Stainless Steel Tagging (ST)
Certificates
Certified Calibration (CC)
Cleaning for Oxygen Service (O2), Up to 1,000 psi
Cleaning for Oxygen Service (O2), 1,500 psi and up
Consult Factory
Black Steel Case (BSC)
Chrome Case (CRC)
Stainless Steel Case (SSC)
Silicone Dampened Movement (SDM)
Glass Lens (GL) (A Steel, Stainless or Chrome Case & Cover Ring must be additionally ordered when Lenses other than acrylic are utilized on all 100 Series Models)
Chrome Front Flange (SCFF) Steel Case
Black Front Flange (SBFF) Steel Case
Black Cover Ring (BCR)
Stainless Steel Cover Ring (SSCR)
Chrome Cover Ring (CCR)
±2.5% Full Scale
NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.
Copper Alloy Bourdon Tube
<ul><li>Certificate of Cleaning (COCL)</li><li>Certificate of Conformance (COC)</li></ul>
Dry Pressure Gauge
1/4" NPT
White background with black primary scale & red secondary scale. UV resistant.
100
Molded Plastic
Acrylonitrile Butadiene Styrene (ABS)
Brass & nylon, or all-brass with highly polished bearing surfaces
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
General purpose non-fillable dry gauge
Vacuum and compound ranges through 0 psi to 15,000 psi
Standard impact-resistant ABS & Steel case
Copper alloy and Brass wetted parts
Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
The pressure gauges must be operated within the following working pressure limits:
Dynamic Pressure application, 60% of the dial range
Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range
The gauges must be operated within specified ambient temperature ranges
Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
1
NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.
Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
102-MFB, 1/4" National Pipe Thread (NPT), Male x Female, Brass, 0.172" Orifice Hard Seat Mini Valve 102-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, 0.172" Orifice Hard Seat Mini Valve 102-MFS, 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve 602-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, Hard Seat, 0.187" Orifice Block and Bleed Valve
Protect the instrument from the damaging effects of high temperature steam
Recommended for use in all steam applications
Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3,800 psi at 850 ºF
0 to 15 psi
NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.
Temperature ratings: 15,000 psi at 200 ºF and 3,000 psi at 1,000 ºF
Used with gauges and gauge valves to adjust the line of sight
Rotates 360º to allow the connected instrument to be positioned in the desired direction
The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
All 316 Stainless Steel construction
Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
Also available with 1/4" NPT connections, same specifications apply
Weight approximately 0.8 lb.
1/4 in
-20 to 60
-4 to 140
0 to 15 psi
Resist clogging and are self-cleaning
Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
Cost effective solution to protect expensive instrumentation
Increases gauge readability by smoothing out pressure surges, pulsations and spikes
5 basic elements available for each snubber to accommodate specific application needs
Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
Exotic materials or intermediate disc grades available
Provides long service life with no moving parts to wear out
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2
Available
Red Set Pointer (SP)
10-32-UNF-2B (10-32)
Orifice - Brass Press Fit Sintered, 20 Micron (CPO)
Orifice - Brass Press Fit 0.1 mm (BP1)
Orifice - Brass Press Fit 0.3 mm (BP3) - Standard
Orifice - Brass Press Fit 0.8 mm (BP8)
Laser Marking (LM)
Stainless Steel Tagging (ST)
Certificates
Certified Calibration (CC)
Cleaning for Oxygen Service (O2), Up to 1,000 psi
Cleaning for Oxygen Service (O2), 1,500 psi and up
Consult Factory
Black Steel Case (BSC)
Chrome Case (CRC)
Stainless Steel Case (SSC)
Silicone Dampened Movement (SDM)
Glass Lens (GL) (A Steel, Stainless or Chrome Case & Cover Ring must be additionally ordered when Lenses other than acrylic are utilized on all 100 Series Models)
Chrome Front Flange (SCFF) Steel Case
Black Front Flange (SBFF) Steel Case
Black Cover Ring (BCR)
Stainless Steel Cover Ring (SSCR)
Chrome Cover Ring (CCR)
±2.5% Full Scale
NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.
Copper Alloy Bourdon Tube
<ul><li>Certificate of Cleaning (COCL)</li><li>Certificate of Conformance (COC)</li></ul>
Dry Pressure Gauge
1/4" NPT
White background with black primary scale & red secondary scale. UV resistant.
100
Molded Plastic
Acrylonitrile Butadiene Styrene (ABS)
Brass & nylon, or all-brass with highly polished bearing surfaces
Acrylonitrile Butadiene Styrene (ABS), Back Connection
Inch
ABS
1/4 in National Pipe Thread (NPT)
White background with black primary scale & red secondary scale. UV resistant.
0 to 15
Back
Acrylic
National Pipe Thread (NPT)
psi/kPa Dual Scale
2-1/2
Brass
-40 to 60
-40 to 140
Built-in bezel, molded as an integral part of the case for ease of panel mounting.
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
General purpose non-fillable dry gauge
Vacuum and compound ranges through 0 psi to 15,000 psi
Standard impact-resistant ABS & Steel case
Copper alloy and Brass wetted parts
Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
The pressure gauges must be operated within the following working pressure limits:
Dynamic Pressure application, 60% of the dial range
Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range
The gauges must be operated within specified ambient temperature ranges
Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
1
NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.
Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
102-MFB, 1/4" National Pipe Thread (NPT), Male x Female, Brass, 0.172" Orifice Hard Seat Mini Valve 102-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, 0.172" Orifice Hard Seat Mini Valve 102-MFS, 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve 602-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, Hard Seat, 0.187" Orifice Block and Bleed Valve
Protect the instrument from the damaging effects of high temperature steam
Recommended for use in all steam applications
Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3,800 psi at 850 ºF
0 to 160 psi
NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.
Temperature ratings: 15,000 psi at 200 ºF and 3,000 psi at 1,000 ºF
Used with gauges and gauge valves to adjust the line of sight
Rotates 360º to allow the connected instrument to be positioned in the desired direction
The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
All 316 Stainless Steel construction
Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
Also available with 1/4" NPT connections, same specifications apply
Weight approximately 0.8 lb.
1/4 in
-20 to 60
-4 to 140
0 to 160 psi
Resist clogging and are self-cleaning
Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
Cost effective solution to protect expensive instrumentation
Increases gauge readability by smoothing out pressure surges, pulsations and spikes
5 basic elements available for each snubber to accommodate specific application needs
Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
Exotic materials or intermediate disc grades available
Provides long service life with no moving parts to wear out
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2
Available
Red Set Pointer (SP)
10-32-UNF-2B (10-32)
Orifice - Brass Press Fit Sintered, 20 Micron (CPO)
Orifice - Brass Press Fit 0.1 mm (BP1)
Orifice - Brass Press Fit 0.3 mm (BP3) - Standard
Orifice - Brass Press Fit 0.8 mm (BP8)
Laser Marking (LM)
Stainless Steel Tagging (ST)
Certificates
Certified Calibration (CC)
Cleaning for Oxygen Service (O2), Up to 1,000 psi
Cleaning for Oxygen Service (O2), 1,500 psi and up
Consult Factory
Black Steel Case (BSC)
Chrome Case (CRC)
Stainless Steel Case (SSC)
Silicone Dampened Movement (SDM)
Glass Lens (GL) (A Steel, Stainless or Chrome Case & Cover Ring must be additionally ordered when Lenses other than acrylic are utilized on all 100 Series Models)
Chrome Front Flange (SCFF) Steel Case
Black Front Flange (SBFF) Steel Case
Black Cover Ring (BCR)
Stainless Steel Cover Ring (SSCR)
Chrome Cover Ring (CCR)
±2.5% Full Scale
NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.
Copper Alloy Bourdon Tube
<ul><li>Certificate of Cleaning (COCL)</li><li>Certificate of Conformance (COC)</li></ul>
Dry Pressure Gauge
1/4" NPT
White background with black primary scale & red secondary scale. UV resistant.
100
Molded Plastic
Acrylonitrile Butadiene Styrene (ABS)
Brass & nylon, or all-brass with highly polished bearing surfaces
Acrylonitrile Butadiene Styrene (ABS), Back Connection
Inch
ABS
1/4 in National Pipe Thread (NPT)
White background with black primary scale & red secondary scale. UV resistant.
0 to 160
Back
Acrylic
National Pipe Thread (NPT)
psi/kPa Dual Scale
2-1/2
Brass
-40 to 60
-40 to 140
Built-in bezel, molded as an integral part of the case for ease of panel mounting.
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
General purpose non-fillable dry gauge
Vacuum and compound ranges through 0 psi to 15,000 psi
Standard impact-resistant ABS & Steel case
Copper alloy and Brass wetted parts
Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
The pressure gauges must be operated within the following working pressure limits:
Dynamic Pressure application, 60% of the dial range
Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range
The gauges must be operated within specified ambient temperature ranges
Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
1
NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.
Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
102-MFB, 1/4" National Pipe Thread (NPT), Male x Female, Brass, 0.172" Orifice Hard Seat Mini Valve 102-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, 0.172" Orifice Hard Seat Mini Valve 102-MFS, 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve 602-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, Hard Seat, 0.187" Orifice Block and Bleed Valve
Protect the instrument from the damaging effects of high temperature steam
Recommended for use in all steam applications
Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3,800 psi at 850 ºF
0 to 160 psi
NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.
Temperature ratings: 15,000 psi at 200 ºF and 3,000 psi at 1,000 ºF
Used with gauges and gauge valves to adjust the line of sight
Rotates 360º to allow the connected instrument to be positioned in the desired direction
The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
All 316 Stainless Steel construction
Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
Also available with 1/4" NPT connections, same specifications apply
Weight approximately 0.8 lb.
1/4 in
-20 to 60
-4 to 140
0 to 160 psi
Resist clogging and are self-cleaning
Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
Cost effective solution to protect expensive instrumentation
Increases gauge readability by smoothing out pressure surges, pulsations and spikes
5 basic elements available for each snubber to accommodate specific application needs
Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
Exotic materials or intermediate disc grades available
Provides long service life with no moving parts to wear out
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2
Available
Red Set Pointer (SP)
10-32-UNF-2B (10-32)
Orifice - Brass Press Fit Sintered, 20 Micron (CPO)
Orifice - Brass Press Fit 0.1 mm (BP1)
Orifice - Brass Press Fit 0.3 mm (BP3) - Standard
Orifice - Brass Press Fit 0.8 mm (BP8)
Laser Marking (LM)
Stainless Steel Tagging (ST)
Certificates
Certified Calibration (CC)
Cleaning for Oxygen Service (O2), Up to 1,000 psi
Cleaning for Oxygen Service (O2), 1,500 psi and up
Consult Factory
Black Steel Case (BSC)
Chrome Case (CRC)
Stainless Steel Case (SSC)
Silicone Dampened Movement (SDM)
Glass Lens (GL) (A Steel, Stainless or Chrome Case & Cover Ring must be additionally ordered when Lenses other than acrylic are utilized on all 100 Series Models)
Chrome Front Flange (SCFF) Steel Case
Black Front Flange (SBFF) Steel Case
Black Cover Ring (BCR)
Stainless Steel Cover Ring (SSCR)
Chrome Cover Ring (CCR)
±2.5% Full Scale
NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.
Copper Alloy Bourdon Tube
<ul><li>Certificate of Cleaning (COCL)</li><li>Certificate of Conformance (COC)</li></ul>
Dry Pressure Gauge
1/4" NPT
White background with black primary scale & red secondary scale. UV resistant.
100
Molded Plastic
Black painted Steel with chrome triangular bezel and U-clamp
Brass & nylon, or all-brass with highly polished bearing surfaces
Steel Case Panel Mount
Inch
Black painted steel with chrome triangular bezel and U-clamp
1/4" NPT
White background with black primary scale & red secondary scale. UV resistant.
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
General purpose non-fillable dry gauge
Vacuum and compound ranges through 0 psi to 15,000 psi
Standard impact-resistant ABS & Steel case
Copper alloy and Brass wetted parts
Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
The pressure gauges must be operated within the following working pressure limits:
Dynamic Pressure application, 60% of the dial range
Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range
The gauges must be operated within specified ambient temperature ranges
Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
1
NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.
Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
402-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, Hard Seat, 0.187" Orifice Needle Valve 602-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, Hard Seat, 0.187" Orifice Block and Bleed Valve 602-MFS, 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, Hard Seat, 0.187" Orifice Block and Bleed Valve 702-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, Soft Seat, 0.187" Orifice Block and Bleed Valve
Protect the instrument from the damaging effects of high temperature steam
Recommended for use in all steam applications
Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3,800 psi at 850 ºF
0 to 60 psi
NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.
Temperature ratings: 15,000 psi at 200 ºF and 3,000 psi at 1,000 ºF
Used with gauges and gauge valves to adjust the line of sight
Rotates 360º to allow the connected instrument to be positioned in the desired direction
The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
All 316 Stainless Steel construction
Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
Also available with 1/4" NPT connections, same specifications apply
Weight approximately 0.8 lb.
1/4 in
-20 to 60
-4 to 140
0 to 60 psi
Resist clogging and are self-cleaning
Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
Cost effective solution to protect expensive instrumentation
Increases gauge readability by smoothing out pressure surges, pulsations and spikes
5 basic elements available for each snubber to accommodate specific application needs
Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
Exotic materials or intermediate disc grades available
Provides long service life with no moving parts to wear out
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2
Available
Red Set Pointer (SP)
10-32-UNF-2B (10-32)
Orifice - Brass Press Fit Sintered, 20 Micron (CPO)
Orifice - Brass Press Fit 0.1 mm (BP1)
Orifice - Brass Press Fit 0.3 mm (BP3) - Standard
Orifice - Brass Press Fit 0.8 mm (BP8)
Laser Marking (LM)
Stainless Steel Tagging (ST)
Certificates
Certified Calibration (CC)
Cleaning for Oxygen Service (O2), Up to 1,000 psi
Cleaning for Oxygen Service (O2), 1,500 psi and up
Consult Factory
Black Steel Case (BSC)
Chrome Case (CRC)
Stainless Steel Case (SSC)
Silicone Dampened Movement (SDM)
Glass Lens (GL) (A Steel, Stainless or Chrome Case & Cover Ring must be additionally ordered when Lenses other than acrylic are utilized on all 100 Series Models)
Chrome Front Flange (SCFF) Steel Case
Black Front Flange (SBFF) Steel Case
Black Cover Ring (BCR)
Stainless Steel Cover Ring (SSCR)
Chrome Cover Ring (CCR)
±1.6% Full Scale
NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.
Copper Alloy Bourdon Tube
<ul><li>Certificate of Cleaning (COCL)</li><li>Certificate of Conformance (COC)</li></ul>
Dry Pressure Gauge
1/4" NPT
White background with black primary scale & red secondary scale. UV resistant.
100
Molded Plastic
Acrylonitrile Butadiene Styrene (ABS)
Brass & nylon, or all-brass with highly polished bearing surfaces
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
