300 Series Brass Case Liquid Filled Pressure Gauges
*PRODUCT IMAGE IS REPRESENTATIVE PROVIDED BY THE MANUFACTURER. DO NOT MAKE BUYING DECISIONS SOLEY BASED ON THE IMAGE. PLEASE VERIFY SPECIFICATIONS MEET YOUR REQUIREMENTS.
High quality, heavy-duty liquid filled gauge
Vacuum and compound ranges through 0 psi to 15,000 psi
Die cast Brass case with natural Brass finish
Copper alloy or 316 Stainless Steel and Brass wetted parts
Cleaning for Oxygen Service (O2) is available only for dry or HL (Halocarbon) filled gauges
For gauges with MIP, GY40 fill is standard for liquid filled gauges
Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.
Automotive
Construction
Hydraulics & pneumatics
Mining
Stamping & forming presses
Transportation
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
The pressure gauges must be operated within the following working pressure limits:
Dynamic Pressure application, 60% of the dial range
Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range
The gauges must be operated within specified ambient temperature ranges
Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
3
NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.
Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
102-MFB, 1/4" National Pipe Thread (NPT), Male x Female, Brass, 0.172" Orifice Hard Seat Mini Valve 102-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, 0.172" Orifice Hard Seat Mini Valve 102-MFS, 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve 602-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, Hard Seat, 0.187" Orifice Block and Bleed Valve
Protect the instrument from the damaging effects of high temperature steam
Recommended for use in all steam applications
Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3800 psi at 850 ºF
0 to 10,000 psi
NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.
Temperature ratings: 15,000 psi at 200 ºF and 3000 psi at 1000 ºF
Used with gauges and gauge valves to adjust the line of sight
Rotates 360º to allow the connected instrument to be positioned in the desired direction
The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
All 316 Stainless Steel construction
Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
Also available with 1/4" NPT connections, same specifications apply
Weight approximately 0.8 lb.
1/4" NPT
-20 to 60
-4 to 140
0 to 10,000 psi
Resist clogging and are self-cleaning
Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
Cost effective solution to protect expensive instrumentation
Increases gauge readability by smoothing out pressure surges, pulsations and spikes
5 basic elements available for each snubber to accommodate specific application needs
Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
Exotic materials or intermediate disc grades available
Provides long service life with no moving parts to wear out
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2
Available
Maximum Indicating Pointer (MIP)
Glass Lens Overlay (GLO)
Safety Glass Overlay (SGO)
Chrome Front Flange (CFF)
Chrome Front Flange w/o Holes (CFFN)
Brass Front Flange (BFF)
Rear Flange (RF)
Chrome Cover Ring (CCR)
Increased Accuracy from 1.5% to 1.0% (IA)
SAE J1926-3:7/16-20 Adjustable Connection (SST) Includes FKM O-ring. Consult factory for availability.
10-32-UNF-2B (10-32)
Orifice - Brass Threaded 0.3mm (BT3)
Orifice - Brass Threaded 0.4mm (BT4)
Orifice - Brass Threaded 0.8mm (BT8) - Standard
Rubber Case Protectors (RCP)
Laser Marking (LM)
Stainless Steel Tagging (ST)
Gauge Fill Options
Silicone (SL)
Halocarbon (HL)
-40 Degree Service (GY40)
Mineral Oil (MO)
Certificates
Certified Calibration (CC)
Cleaning for Oxygen Service (O2), Up to 1000 psi
Cleaning for Oxygen Service (O2), 1500 psi and up
±1.6% Full Scale
NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.
<ul><li>Chrome Adaptor Ring (25-13-1-CHROME-AR)</li><li>Rubber Case Protector (25-123459-0-RCP)</li><li>Certificate of Cleaning (COCL)</li><li>Certificate of Conformance (COC)</li></ul>
Dynamic Pressure The working pressure should be limited to 60% of the dial range
Static Pressure The working pressure, where no sharp fluctuations occur, should be limited to 90% of the dial range
Dual scale metric dials in psi/bar, psi/kPa and psi/kg/cm2
Other scales are available for specific sizes and ranges, such as single scale bar and kPa, refrigerant scales and altitude scales
Customized special dials such as non-standard metric scale, tons of ram, lbs. of force, etc. are available in small quantities (as few as one piece) on some NOSHOK gauges
Please consult the factory for availability.
Glycerin or silicone could result in a spontaneous chemical reaction or explosion when combined with strong oxidizing agents including, but not limited to, chlorine, oxygen, hydrochloric or nitric acid, and hydrogen peroxide. Do not use glycerin or silicone filled gauges or accessories in these types of service. Consult factory for application assistance.
This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
Pressure Gauge
Balanced Aluminum, Black Finish
psi Single Scale
2-1/2
1/4" NPT
Bottom
Glycerin
0 to 10,000
Aluminum, white background with black scale. UV resistant.
Brass and Nickel-Silver with Highly Polished Bearing Surfaces
1/4" NPT
300
Brass, Bottom Connection
Die Cast Brass (Natural Brass Finish) with Safety Relief Plug
Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.
Automotive
Construction
Hydraulics & pneumatics
Mining
Stamping & forming presses
Transportation
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
The pressure gauges must be operated within the following working pressure limits:
Dynamic Pressure application, 60% of the dial range
Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range
The gauges must be operated within specified ambient temperature ranges
Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
3
NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.
Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
102-MFB, 1/4" National Pipe Thread (NPT), Male x Female, Brass, 0.172" Orifice Hard Seat Mini Valve 102-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, 0.172" Orifice Hard Seat Mini Valve 102-MFS, 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve 602-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, Hard Seat, 0.187" Orifice Block and Bleed Valve
Protect the instrument from the damaging effects of high temperature steam
Recommended for use in all steam applications
Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3800 psi at 850 ºF
0 to 1,000 psi
NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.
Temperature ratings: 15,000 psi at 200 ºF and 3000 psi at 1000 ºF
Used with gauges and gauge valves to adjust the line of sight
Rotates 360º to allow the connected instrument to be positioned in the desired direction
The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
All 316 Stainless Steel construction
Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
Also available with 1/4" NPT connections, same specifications apply
Weight approximately 0.8 lb.
1/4" NPT
-20 to 60
-4 to 140
0 to 1,000 psi
Resist clogging and are self-cleaning
Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
Cost effective solution to protect expensive instrumentation
Increases gauge readability by smoothing out pressure surges, pulsations and spikes
5 basic elements available for each snubber to accommodate specific application needs
Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
Exotic materials or intermediate disc grades available
Provides long service life with no moving parts to wear out
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2
Available
Maximum Indicating Pointer (MIP)
Glass Lens Overlay (GLO)
Safety Glass Overlay (SGO)
Chrome Front Flange (CFF)
Chrome Front Flange w/o Holes (CFFN)
Brass Front Flange (BFF)
Rear Flange (RF)
Chrome Cover Ring (CCR)
Increased Accuracy from 1.5% to 1.0% (IA)
SAE J1926-3:7/16-20 Adjustable Connection (SST) Includes FKM O-ring. Consult factory for availability.
10-32-UNF-2B (10-32)
Orifice - Brass Threaded 0.3mm (BT3)
Orifice - Brass Threaded 0.4mm (BT4)
Orifice - Brass Threaded 0.8mm (BT8) - Standard
Rubber Case Protectors (RCP)
Laser Marking (LM)
Stainless Steel Tagging (ST)
Gauge Fill Options
Silicone (SL)
Halocarbon (HL)
-40 Degree Service (GY40)
Mineral Oil (MO)
Certificates
Certified Calibration (CC)
Cleaning for Oxygen Service (O2), Up to 1000 psi
Cleaning for Oxygen Service (O2), 1500 psi and up
±1.6% Full Scale
NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.
<ul><li>Chrome Adaptor Ring (25-13-1-CHROME-AR)</li><li>Rubber Case Protector (25-123459-0-RCP)</li><li>Certificate of Cleaning (COCL)</li><li>Certificate of Conformance (COC)</li></ul>
Dynamic Pressure The working pressure should be limited to 60% of the dial range
Static Pressure The working pressure, where no sharp fluctuations occur, should be limited to 90% of the dial range
Dual scale metric dials in psi/bar, psi/kPa and psi/kg/cm2
Other scales are available for specific sizes and ranges, such as single scale bar and kPa, refrigerant scales and altitude scales
Customized special dials such as non-standard metric scale, tons of ram, lbs. of force, etc. are available in small quantities (as few as one piece) on some NOSHOK gauges
Please consult the factory for availability.
Glycerin or silicone could result in a spontaneous chemical reaction or explosion when combined with strong oxidizing agents including, but not limited to, chlorine, oxygen, hydrochloric or nitric acid, and hydrogen peroxide. Do not use glycerin or silicone filled gauges or accessories in these types of service. Consult factory for application assistance.
This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
Pressure Gauge
Balanced Aluminum, Black Finish
psi Single Scale
2-1/2
1/4" NPT
Bottom
Glycerin
0 to 1,000
Aluminum, white background with black scale. UV resistant.
Brass and Nickel-Silver with Highly Polished Bearing Surfaces
1/4" NPT
300
Brass, Bottom Connection
Die Cast Brass (Natural Brass Finish) with Safety Relief Plug
Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.
Automotive
Construction
Hydraulics & pneumatics
Mining
Stamping & forming presses
Transportation
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
The pressure gauges must be operated within the following working pressure limits:
Dynamic Pressure application, 60% of the dial range
Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range
The gauges must be operated within specified ambient temperature ranges
Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
3
NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.
Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
102-MFB, 1/4" National Pipe Thread (NPT), Male x Female, Brass, 0.172" Orifice Hard Seat Mini Valve 102-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, 0.172" Orifice Hard Seat Mini Valve 102-MFS, 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve 602-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, Hard Seat, 0.187" Orifice Block and Bleed Valve
Protect the instrument from the damaging effects of high temperature steam
Recommended for use in all steam applications
Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3800 psi at 850 ºF
0 to 100 psi
NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.
Temperature ratings: 15,000 psi at 200 ºF and 3000 psi at 1000 ºF
Used with gauges and gauge valves to adjust the line of sight
Rotates 360º to allow the connected instrument to be positioned in the desired direction
The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
All 316 Stainless Steel construction
Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
Also available with 1/4" NPT connections, same specifications apply
Weight approximately 0.8 lb.
1/4" NPT
-20 to 60
-4 to 140
0 to 100 psi
Resist clogging and are self-cleaning
Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
Cost effective solution to protect expensive instrumentation
Increases gauge readability by smoothing out pressure surges, pulsations and spikes
5 basic elements available for each snubber to accommodate specific application needs
Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
Exotic materials or intermediate disc grades available
Provides long service life with no moving parts to wear out
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2
Available
Maximum Indicating Pointer (MIP)
Glass Lens Overlay (GLO)
Safety Glass Overlay (SGO)
Chrome Front Flange (CFF)
Chrome Front Flange w/o Holes (CFFN)
Brass Front Flange (BFF)
Rear Flange (RF)
Chrome Cover Ring (CCR)
Increased Accuracy from 1.5% to 1.0% (IA)
SAE J1926-3:7/16-20 Adjustable Connection (SST) Includes FKM O-ring. Consult factory for availability.
10-32-UNF-2B (10-32)
Orifice - Brass Threaded 0.3mm (BT3)
Orifice - Brass Threaded 0.4mm (BT4)
Orifice - Brass Threaded 0.8mm (BT8) - Standard
Rubber Case Protectors (RCP)
Laser Marking (LM)
Stainless Steel Tagging (ST)
Gauge Fill Options
Silicone (SL)
Halocarbon (HL)
-40 Degree Service (GY40)
Mineral Oil (MO)
Certificates
Certified Calibration (CC)
Cleaning for Oxygen Service (O2), Up to 1000 psi
Cleaning for Oxygen Service (O2), 1500 psi and up
±1.6% Full Scale
NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.
<ul><li>Chrome Adaptor Ring (25-13-1-CHROME-AR)</li><li>Rubber Case Protector (25-123459-0-RCP)</li><li>Certificate of Cleaning (COCL)</li><li>Certificate of Conformance (COC)</li></ul>
Dynamic Pressure The working pressure should be limited to 60% of the dial range
Static Pressure The working pressure, where no sharp fluctuations occur, should be limited to 90% of the dial range
Dual scale metric dials in psi/bar, psi/kPa and psi/kg/cm2
Other scales are available for specific sizes and ranges, such as single scale bar and kPa, refrigerant scales and altitude scales
Customized special dials such as non-standard metric scale, tons of ram, lbs. of force, etc. are available in small quantities (as few as one piece) on some NOSHOK gauges
Please consult the factory for availability.
Glycerin or silicone could result in a spontaneous chemical reaction or explosion when combined with strong oxidizing agents including, but not limited to, chlorine, oxygen, hydrochloric or nitric acid, and hydrogen peroxide. Do not use glycerin or silicone filled gauges or accessories in these types of service. Consult factory for application assistance.
This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
Pressure Gauge
Balanced Aluminum, Black Finish
psi Single Scale
2-1/2
1/4" NPT
Bottom
Glycerin
0 to 100
Aluminum, white background with black scale. UV resistant.
Brass and Nickel-Silver with Highly Polished Bearing Surfaces
1/4" NPT
300
Brass, Bottom Connection
Die Cast Brass (Natural Brass Finish) with Safety Relief Plug
Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.
Automotive
Construction
Hydraulics & pneumatics
Mining
Stamping & forming presses
Transportation
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
The pressure gauges must be operated within the following working pressure limits:
Dynamic Pressure application, 60% of the dial range
Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range
The gauges must be operated within specified ambient temperature ranges
Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
3
NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.
Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
Protect the instrument from the damaging effects of high temperature steam
Recommended for use in all steam applications
Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3800 psi at 850 ºF
0 to 15,000 psi
NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.
Temperature ratings: 15,000 psi at 200 ºF and 3000 psi at 1000 ºF
Used with gauges and gauge valves to adjust the line of sight
Rotates 360º to allow the connected instrument to be positioned in the desired direction
The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
All 316 Stainless Steel construction
Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
Also available with 1/4" NPT connections, same specifications apply
Weight approximately 0.8 lb.
1/4" NPT
-20 to 60
-4 to 140
0 to 15,000 psi
Resist clogging and are self-cleaning
Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
Cost effective solution to protect expensive instrumentation
Increases gauge readability by smoothing out pressure surges, pulsations and spikes
5 basic elements available for each snubber to accommodate specific application needs
Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
Exotic materials or intermediate disc grades available
Provides long service life with no moving parts to wear out
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2
Available
Maximum Indicating Pointer (MIP)
Glass Lens Overlay (GLO)
Safety Glass Overlay (SGO)
Chrome Front Flange (CFF)
Chrome Front Flange w/o Holes (CFFN)
Brass Front Flange (BFF)
Rear Flange (RF)
Chrome Cover Ring (CCR)
Increased Accuracy from 1.5% to 1.0% (IA)
SAE J1926-3:7/16-20 Adjustable Connection (SST) Includes FKM O-ring. Consult factory for availability.
10-32-UNF-2B (10-32)
Orifice - Brass Threaded 0.3mm (BT3)
Orifice - Brass Threaded 0.4mm (BT4)
Orifice - Brass Threaded 0.8mm (BT8) - Standard
Rubber Case Protectors (RCP)
Laser Marking (LM)
Stainless Steel Tagging (ST)
Gauge Fill Options
Silicone (SL)
Halocarbon (HL)
-40 Degree Service (GY40)
Mineral Oil (MO)
Certificates
Certified Calibration (CC)
Cleaning for Oxygen Service (O2), Up to 1000 psi
Cleaning for Oxygen Service (O2), 1500 psi and up
±1.6% Full Scale
NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.
<ul><li>Chrome Adaptor Ring (25-13-1-CHROME-AR)</li><li>Rubber Case Protector (25-123459-0-RCP)</li><li>Certificate of Cleaning (COCL)</li><li>Certificate of Conformance (COC)</li></ul>
Dynamic Pressure The working pressure should be limited to 60% of the dial range
Static Pressure The working pressure, where no sharp fluctuations occur, should be limited to 90% of the dial range
Dual scale metric dials in psi/bar, psi/kPa and psi/kg/cm2
Other scales are available for specific sizes and ranges, such as single scale bar and kPa, refrigerant scales and altitude scales
Customized special dials such as non-standard metric scale, tons of ram, lbs. of force, etc. are available in small quantities (as few as one piece) on some NOSHOK gauges
Please consult the factory for availability.
Glycerin or silicone could result in a spontaneous chemical reaction or explosion when combined with strong oxidizing agents including, but not limited to, chlorine, oxygen, hydrochloric or nitric acid, and hydrogen peroxide. Do not use glycerin or silicone filled gauges or accessories in these types of service. Consult factory for application assistance.
This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
Pressure Gauge
Balanced Aluminum, Black Finish
psi Single Scale
2-1/2
1/4" NPT
Bottom
Glycerin
0 to 15,000
Aluminum, white background with black scale. UV resistant.
Brass and Nickel-Silver with Highly Polished Bearing Surfaces
1/4" NPT
300
Brass, Bottom Connection
Die Cast Brass (Natural Brass Finish) with Safety Relief Plug
Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.
Automotive
Construction
Hydraulics & pneumatics
Mining
Stamping & forming presses
Transportation
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
The pressure gauges must be operated within the following working pressure limits:
Dynamic Pressure application, 60% of the dial range
Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range
The gauges must be operated within specified ambient temperature ranges
Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
3
NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.
Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
102-MFB, 1/4" National Pipe Thread (NPT), Male x Female, Brass, 0.172" Orifice Hard Seat Mini Valve 102-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, 0.172" Orifice Hard Seat Mini Valve 102-MFS, 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve 602-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, Hard Seat, 0.187" Orifice Block and Bleed Valve
Protect the instrument from the damaging effects of high temperature steam
Recommended for use in all steam applications
Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3800 psi at 850 ºF
0 to 1,500 psi
NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.
Temperature ratings: 15,000 psi at 200 ºF and 3000 psi at 1000 ºF
Used with gauges and gauge valves to adjust the line of sight
Rotates 360º to allow the connected instrument to be positioned in the desired direction
The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
All 316 Stainless Steel construction
Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
Also available with 1/4" NPT connections, same specifications apply
Weight approximately 0.8 lb.
1/4" NPT
-20 to 60
-4 to 140
0 to 1,500 psi
Resist clogging and are self-cleaning
Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
Cost effective solution to protect expensive instrumentation
Increases gauge readability by smoothing out pressure surges, pulsations and spikes
5 basic elements available for each snubber to accommodate specific application needs
Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
Exotic materials or intermediate disc grades available
Provides long service life with no moving parts to wear out
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2
Available
Maximum Indicating Pointer (MIP)
Glass Lens Overlay (GLO)
Safety Glass Overlay (SGO)
Chrome Front Flange (CFF)
Chrome Front Flange w/o Holes (CFFN)
Brass Front Flange (BFF)
Rear Flange (RF)
Chrome Cover Ring (CCR)
Increased Accuracy from 1.5% to 1.0% (IA)
SAE J1926-3:7/16-20 Adjustable Connection (SST) Includes FKM O-ring. Consult factory for availability.
10-32-UNF-2B (10-32)
Orifice - Brass Threaded 0.3mm (BT3)
Orifice - Brass Threaded 0.4mm (BT4)
Orifice - Brass Threaded 0.8mm (BT8) - Standard
Rubber Case Protectors (RCP)
Laser Marking (LM)
Stainless Steel Tagging (ST)
Gauge Fill Options
Silicone (SL)
Halocarbon (HL)
-40 Degree Service (GY40)
Mineral Oil (MO)
Certificates
Certified Calibration (CC)
Cleaning for Oxygen Service (O2), Up to 1000 psi
Cleaning for Oxygen Service (O2), 1500 psi and up
±1.6% Full Scale
NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.
<ul><li>Chrome Adaptor Ring (25-13-1-CHROME-AR)</li><li>Rubber Case Protector (25-123459-0-RCP)</li><li>Certificate of Cleaning (COCL)</li><li>Certificate of Conformance (COC)</li></ul>
Dynamic Pressure The working pressure should be limited to 60% of the dial range
Static Pressure The working pressure, where no sharp fluctuations occur, should be limited to 90% of the dial range
Dual scale metric dials in psi/bar, psi/kPa and psi/kg/cm2
Other scales are available for specific sizes and ranges, such as single scale bar and kPa, refrigerant scales and altitude scales
Customized special dials such as non-standard metric scale, tons of ram, lbs. of force, etc. are available in small quantities (as few as one piece) on some NOSHOK gauges
Please consult the factory for availability.
Glycerin or silicone could result in a spontaneous chemical reaction or explosion when combined with strong oxidizing agents including, but not limited to, chlorine, oxygen, hydrochloric or nitric acid, and hydrogen peroxide. Do not use glycerin or silicone filled gauges or accessories in these types of service. Consult factory for application assistance.
This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
Pressure Gauge
Balanced Aluminum, Black Finish
psi Single Scale
2-1/2
1/4" NPT
Bottom
Glycerin
0 to 1,500
Aluminum, white background with black scale. UV resistant.
Brass and Nickel-Silver with Highly Polished Bearing Surfaces
1/4" NPT
300
Brass, Bottom Connection
Die Cast Brass (Natural Brass Finish) with Safety Relief Plug
Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.
Automotive
Construction
Hydraulics & pneumatics
Mining
Stamping & forming presses
Transportation
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
The pressure gauges must be operated within the following working pressure limits:
Dynamic Pressure application, 60% of the dial range
Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range
The gauges must be operated within specified ambient temperature ranges
Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
3
NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.
Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
102-MFB, 1/4" National Pipe Thread (NPT), Male x Female, Brass, 0.172" Orifice Hard Seat Mini Valve 102-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, 0.172" Orifice Hard Seat Mini Valve 102-MFS, 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve 602-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, Hard Seat, 0.187" Orifice Block and Bleed Valve
Protect the instrument from the damaging effects of high temperature steam
Recommended for use in all steam applications
Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3800 psi at 850 ºF
0 to 15 psi
NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.
Temperature ratings: 15,000 psi at 200 ºF and 3000 psi at 1000 ºF
Used with gauges and gauge valves to adjust the line of sight
Rotates 360º to allow the connected instrument to be positioned in the desired direction
The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
All 316 Stainless Steel construction
Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
Also available with 1/4" NPT connections, same specifications apply
Weight approximately 0.8 lb.
1/4" NPT
-20 to 60
-4 to 140
0 to 15 psi
Resist clogging and are self-cleaning
Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
Cost effective solution to protect expensive instrumentation
Increases gauge readability by smoothing out pressure surges, pulsations and spikes
5 basic elements available for each snubber to accommodate specific application needs
Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
Exotic materials or intermediate disc grades available
Provides long service life with no moving parts to wear out
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2
Available
Maximum Indicating Pointer (MIP)
Glass Lens Overlay (GLO)
Safety Glass Overlay (SGO)
Chrome Front Flange (CFF)
Chrome Front Flange w/o Holes (CFFN)
Brass Front Flange (BFF)
Rear Flange (RF)
Chrome Cover Ring (CCR)
Increased Accuracy from 1.5% to 1.0% (IA)
SAE J1926-3:7/16-20 Adjustable Connection (SST) Includes FKM O-ring. Consult factory for availability.
10-32-UNF-2B (10-32)
Orifice - Brass Threaded 0.3mm (BT3)
Orifice - Brass Threaded 0.4mm (BT4)
Orifice - Brass Threaded 0.8mm (BT8) - Standard
Rubber Case Protectors (RCP)
Laser Marking (LM)
Stainless Steel Tagging (ST)
Gauge Fill Options
Silicone (SL)
Halocarbon (HL)
-40 Degree Service (GY40)
Mineral Oil (MO)
Certificates
Certified Calibration (CC)
Cleaning for Oxygen Service (O2), Up to 1000 psi
Cleaning for Oxygen Service (O2), 1500 psi and up
±1.6% Full Scale
NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.
<ul><li>Chrome Adaptor Ring (25-13-1-CHROME-AR)</li><li>Rubber Case Protector (25-123459-0-RCP)</li><li>Certificate of Cleaning (COCL)</li><li>Certificate of Conformance (COC)</li></ul>
Dynamic Pressure The working pressure should be limited to 60% of the dial range
Static Pressure The working pressure, where no sharp fluctuations occur, should be limited to 90% of the dial range
Dual scale metric dials in psi/bar, psi/kPa and psi/kg/cm2
Other scales are available for specific sizes and ranges, such as single scale bar and kPa, refrigerant scales and altitude scales
Customized special dials such as non-standard metric scale, tons of ram, lbs. of force, etc. are available in small quantities (as few as one piece) on some NOSHOK gauges
Please consult the factory for availability.
Glycerin or silicone could result in a spontaneous chemical reaction or explosion when combined with strong oxidizing agents including, but not limited to, chlorine, oxygen, hydrochloric or nitric acid, and hydrogen peroxide. Do not use glycerin or silicone filled gauges or accessories in these types of service. Consult factory for application assistance.
This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
Pressure Gauge
Balanced Aluminum, Black Finish
psi Single Scale
2-1/2
1/4" NPT
Bottom
Glycerin
0 to 15
Aluminum, white background with black scale. UV resistant.
Brass and Nickel-Silver with Highly Polished Bearing Surfaces
1/4" NPT
300
Brass, Bottom Connection
Die Cast Brass (Natural Brass Finish) with Safety Relief Plug
Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.
Automotive
Construction
Hydraulics & pneumatics
Mining
Stamping & forming presses
Transportation
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
The pressure gauges must be operated within the following working pressure limits:
Dynamic Pressure application, 60% of the dial range
Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range
The gauges must be operated within specified ambient temperature ranges
Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
3
NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.
Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
102-MFB, 1/4" National Pipe Thread (NPT), Male x Female, Brass, 0.172" Orifice Hard Seat Mini Valve 102-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, 0.172" Orifice Hard Seat Mini Valve 102-MFS, 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve 602-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, Hard Seat, 0.187" Orifice Block and Bleed Valve
Protect the instrument from the damaging effects of high temperature steam
Recommended for use in all steam applications
Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3800 psi at 850 ºF
0 to 160 psi
NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.
Temperature ratings: 15,000 psi at 200 ºF and 3000 psi at 1000 ºF
Used with gauges and gauge valves to adjust the line of sight
Rotates 360º to allow the connected instrument to be positioned in the desired direction
The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
All 316 Stainless Steel construction
Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
Also available with 1/4" NPT connections, same specifications apply
Weight approximately 0.8 lb.
1/4" NPT
-20 to 60
-4 to 140
0 to 160 psi
Resist clogging and are self-cleaning
Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
Cost effective solution to protect expensive instrumentation
Increases gauge readability by smoothing out pressure surges, pulsations and spikes
5 basic elements available for each snubber to accommodate specific application needs
Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
Exotic materials or intermediate disc grades available
Provides long service life with no moving parts to wear out
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2
Available
Maximum Indicating Pointer (MIP)
Glass Lens Overlay (GLO)
Safety Glass Overlay (SGO)
Chrome Front Flange (CFF)
Chrome Front Flange w/o Holes (CFFN)
Brass Front Flange (BFF)
Rear Flange (RF)
Chrome Cover Ring (CCR)
Increased Accuracy from 1.5% to 1.0% (IA)
SAE J1926-3:7/16-20 Adjustable Connection (SST) Includes FKM O-ring. Consult factory for availability.
10-32-UNF-2B (10-32)
Orifice - Brass Threaded 0.3mm (BT3)
Orifice - Brass Threaded 0.4mm (BT4)
Orifice - Brass Threaded 0.8mm (BT8) - Standard
Rubber Case Protectors (RCP)
Laser Marking (LM)
Stainless Steel Tagging (ST)
Gauge Fill Options
Silicone (SL)
Halocarbon (HL)
-40 Degree Service (GY40)
Mineral Oil (MO)
Certificates
Certified Calibration (CC)
Cleaning for Oxygen Service (O2), Up to 1000 psi
Cleaning for Oxygen Service (O2), 1500 psi and up
±1.6% Full Scale
NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.
<ul><li>Chrome Adaptor Ring (25-13-1-CHROME-AR)</li><li>Rubber Case Protector (25-123459-0-RCP)</li><li>Certificate of Cleaning (COCL)</li><li>Certificate of Conformance (COC)</li></ul>
Dynamic Pressure The working pressure should be limited to 60% of the dial range
Static Pressure The working pressure, where no sharp fluctuations occur, should be limited to 90% of the dial range
Dual scale metric dials in psi/bar, psi/kPa and psi/kg/cm2
Other scales are available for specific sizes and ranges, such as single scale bar and kPa, refrigerant scales and altitude scales
Customized special dials such as non-standard metric scale, tons of ram, lbs. of force, etc. are available in small quantities (as few as one piece) on some NOSHOK gauges
Please consult the factory for availability.
Glycerin or silicone could result in a spontaneous chemical reaction or explosion when combined with strong oxidizing agents including, but not limited to, chlorine, oxygen, hydrochloric or nitric acid, and hydrogen peroxide. Do not use glycerin or silicone filled gauges or accessories in these types of service. Consult factory for application assistance.
This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
Pressure Gauge
Balanced Aluminum, Black Finish
psi Single Scale
2-1/2
1/4" NPT
Bottom
Glycerin
0 to 160
Aluminum, white background with black scale. UV resistant.
Brass and Nickel-Silver with Highly Polished Bearing Surfaces
1/4" NPT
300
Brass, Bottom Connection
Die Cast Brass (Natural Brass Finish) with Safety Relief Plug
Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.
Automotive
Construction
Hydraulics & pneumatics
Mining
Stamping & forming presses
Transportation
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
The pressure gauges must be operated within the following working pressure limits:
Dynamic Pressure application, 60% of the dial range
Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range
The gauges must be operated within specified ambient temperature ranges
Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
3
NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.
Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
102-MFB, 1/4" National Pipe Thread (NPT), Male x Female, Brass, 0.172" Orifice Hard Seat Mini Valve 102-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, 0.172" Orifice Hard Seat Mini Valve 102-MFS, 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve 602-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, Hard Seat, 0.187" Orifice Block and Bleed Valve
Protect the instrument from the damaging effects of high temperature steam
Recommended for use in all steam applications
Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3800 psi at 850 ºF
0 to 2,000 psi
NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.
Temperature ratings: 15,000 psi at 200 ºF and 3000 psi at 1000 ºF
Used with gauges and gauge valves to adjust the line of sight
Rotates 360º to allow the connected instrument to be positioned in the desired direction
The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
All 316 Stainless Steel construction
Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
Also available with 1/4" NPT connections, same specifications apply
Weight approximately 0.8 lb.
1/4" NPT
-20 to 60
-4 to 140
0 to 2,000 psi
Resist clogging and are self-cleaning
Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
Cost effective solution to protect expensive instrumentation
Increases gauge readability by smoothing out pressure surges, pulsations and spikes
5 basic elements available for each snubber to accommodate specific application needs
Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
Exotic materials or intermediate disc grades available
Provides long service life with no moving parts to wear out
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2
Available
Maximum Indicating Pointer (MIP)
Glass Lens Overlay (GLO)
Safety Glass Overlay (SGO)
Chrome Front Flange (CFF)
Chrome Front Flange w/o Holes (CFFN)
Brass Front Flange (BFF)
Rear Flange (RF)
Chrome Cover Ring (CCR)
Increased Accuracy from 1.5% to 1.0% (IA)
SAE J1926-3:7/16-20 Adjustable Connection (SST) Includes FKM O-ring. Consult factory for availability.
10-32-UNF-2B (10-32)
Orifice - Brass Threaded 0.3mm (BT3)
Orifice - Brass Threaded 0.4mm (BT4)
Orifice - Brass Threaded 0.8mm (BT8) - Standard
Rubber Case Protectors (RCP)
Laser Marking (LM)
Stainless Steel Tagging (ST)
Gauge Fill Options
Silicone (SL)
Halocarbon (HL)
-40 Degree Service (GY40)
Mineral Oil (MO)
Certificates
Certified Calibration (CC)
Cleaning for Oxygen Service (O2), Up to 1000 psi
Cleaning for Oxygen Service (O2), 1500 psi and up
±1.6% Full Scale
NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.
<ul><li>Chrome Adaptor Ring (25-13-1-CHROME-AR)</li><li>Rubber Case Protector (25-123459-0-RCP)</li><li>Certificate of Cleaning (COCL)</li><li>Certificate of Conformance (COC)</li></ul>
Dynamic Pressure The working pressure should be limited to 60% of the dial range
Static Pressure The working pressure, where no sharp fluctuations occur, should be limited to 90% of the dial range
Dual scale metric dials in psi/bar, psi/kPa and psi/kg/cm2
Other scales are available for specific sizes and ranges, such as single scale bar and kPa, refrigerant scales and altitude scales
Customized special dials such as non-standard metric scale, tons of ram, lbs. of force, etc. are available in small quantities (as few as one piece) on some NOSHOK gauges
Please consult the factory for availability.
Glycerin or silicone could result in a spontaneous chemical reaction or explosion when combined with strong oxidizing agents including, but not limited to, chlorine, oxygen, hydrochloric or nitric acid, and hydrogen peroxide. Do not use glycerin or silicone filled gauges or accessories in these types of service. Consult factory for application assistance.
This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
Pressure Gauge
Balanced Aluminum, Black Finish
psi Single Scale
2-1/2
1/4" NPT
Bottom
Glycerin
0 to 2,000
Aluminum, white background with black scale. UV resistant.
Brass and Nickel-Silver with Highly Polished Bearing Surfaces
1/4" NPT
300
Brass, Bottom Connection
Die Cast Brass (Natural Brass Finish) with Safety Relief Plug
Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.
Automotive
Construction
Hydraulics & pneumatics
Mining
Stamping & forming presses
Transportation
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
The pressure gauges must be operated within the following working pressure limits:
Dynamic Pressure application, 60% of the dial range
Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range
The gauges must be operated within specified ambient temperature ranges
Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
3
NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.
Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
102-MFB, 1/4" National Pipe Thread (NPT), Male x Female, Brass, 0.172" Orifice Hard Seat Mini Valve 102-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, 0.172" Orifice Hard Seat Mini Valve 102-MFS, 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve 602-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, Hard Seat, 0.187" Orifice Block and Bleed Valve
Protect the instrument from the damaging effects of high temperature steam
Recommended for use in all steam applications
Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3800 psi at 850 ºF
0 to 3,000 psi
NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.
Temperature ratings: 15,000 psi at 200 ºF and 3000 psi at 1000 ºF
Used with gauges and gauge valves to adjust the line of sight
Rotates 360º to allow the connected instrument to be positioned in the desired direction
The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
All 316 Stainless Steel construction
Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
Also available with 1/4" NPT connections, same specifications apply
Weight approximately 0.8 lb.
1/4" NPT
-20 to 60
-4 to 140
0 to 3,000 psi
Resist clogging and are self-cleaning
Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
Cost effective solution to protect expensive instrumentation
Increases gauge readability by smoothing out pressure surges, pulsations and spikes
5 basic elements available for each snubber to accommodate specific application needs
Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
Exotic materials or intermediate disc grades available
Provides long service life with no moving parts to wear out
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2
Available
Maximum Indicating Pointer (MIP)
Glass Lens Overlay (GLO)
Safety Glass Overlay (SGO)
Chrome Front Flange (CFF)
Chrome Front Flange w/o Holes (CFFN)
Brass Front Flange (BFF)
Rear Flange (RF)
Chrome Cover Ring (CCR)
Increased Accuracy from 1.5% to 1.0% (IA)
SAE J1926-3:7/16-20 Adjustable Connection (SST) Includes FKM O-ring. Consult factory for availability.
10-32-UNF-2B (10-32)
Orifice - Brass Threaded 0.3mm (BT3)
Orifice - Brass Threaded 0.4mm (BT4)
Orifice - Brass Threaded 0.8mm (BT8) - Standard
Rubber Case Protectors (RCP)
Laser Marking (LM)
Stainless Steel Tagging (ST)
Gauge Fill Options
Silicone (SL)
Halocarbon (HL)
-40 Degree Service (GY40)
Mineral Oil (MO)
Certificates
Certified Calibration (CC)
Cleaning for Oxygen Service (O2), Up to 1000 psi
Cleaning for Oxygen Service (O2), 1500 psi and up
±1.6% Full Scale
NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.
<ul><li>Chrome Adaptor Ring (25-13-1-CHROME-AR)</li><li>Rubber Case Protector (25-123459-0-RCP)</li><li>Certificate of Cleaning (COCL)</li><li>Certificate of Conformance (COC)</li></ul>
Dynamic Pressure The working pressure should be limited to 60% of the dial range
Static Pressure The working pressure, where no sharp fluctuations occur, should be limited to 90% of the dial range
Dual scale metric dials in psi/bar, psi/kPa and psi/kg/cm2
Other scales are available for specific sizes and ranges, such as single scale bar and kPa, refrigerant scales and altitude scales
Customized special dials such as non-standard metric scale, tons of ram, lbs. of force, etc. are available in small quantities (as few as one piece) on some NOSHOK gauges
Please consult the factory for availability.
Glycerin or silicone could result in a spontaneous chemical reaction or explosion when combined with strong oxidizing agents including, but not limited to, chlorine, oxygen, hydrochloric or nitric acid, and hydrogen peroxide. Do not use glycerin or silicone filled gauges or accessories in these types of service. Consult factory for application assistance.
This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
Pressure Gauge
Balanced Aluminum, Black Finish
psi Single Scale
2-1/2
1/4" NPT
Bottom
Glycerin
0 to 3,000
Aluminum, white background with black scale. UV resistant.
Brass and Nickel-Silver with Highly Polished Bearing Surfaces
1/4" NPT
300
Brass, Bottom Connection
Die Cast Brass (Natural Brass Finish) with Safety Relief Plug
Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.
Automotive
Construction
Hydraulics & pneumatics
Mining
Stamping & forming presses
Transportation
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
The pressure gauges must be operated within the following working pressure limits:
Dynamic Pressure application, 60% of the dial range
Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range
The gauges must be operated within specified ambient temperature ranges
Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
3
NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.
Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
102-MFB, 1/4" National Pipe Thread (NPT), Male x Female, Brass, 0.172" Orifice Hard Seat Mini Valve 102-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, 0.172" Orifice Hard Seat Mini Valve 102-MFS, 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve 602-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, Hard Seat, 0.187" Orifice Block and Bleed Valve
Protect the instrument from the damaging effects of high temperature steam
Recommended for use in all steam applications
Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3800 psi at 850 ºF
0 to 3,000 psi
NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.
Temperature ratings: 15,000 psi at 200 ºF and 3000 psi at 1000 ºF
Used with gauges and gauge valves to adjust the line of sight
Rotates 360º to allow the connected instrument to be positioned in the desired direction
The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
All 316 Stainless Steel construction
Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
Also available with 1/4" NPT connections, same specifications apply
Weight approximately 0.8 lb.
1/4" NPT
-20 to 60
-4 to 140
0 to 3,000 psi
Resist clogging and are self-cleaning
Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
Cost effective solution to protect expensive instrumentation
Increases gauge readability by smoothing out pressure surges, pulsations and spikes
5 basic elements available for each snubber to accommodate specific application needs
Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
Exotic materials or intermediate disc grades available
Provides long service life with no moving parts to wear out
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2
Available
Maximum Indicating Pointer (MIP)
Glass Lens Overlay (GLO)
Safety Glass Overlay (SGO)
Chrome Front Flange (CFF)
Chrome Front Flange w/o Holes (CFFN)
Brass Front Flange (BFF)
Rear Flange (RF)
Chrome Cover Ring (CCR)
Increased Accuracy from 1.5% to 1.0% (IA)
SAE J1926-3:7/16-20 Adjustable Connection (SST) Includes FKM O-ring. Consult factory for availability.
10-32-UNF-2B (10-32)
Orifice - Brass Threaded 0.3mm (BT3)
Orifice - Brass Threaded 0.4mm (BT4)
Orifice - Brass Threaded 0.8mm (BT8) - Standard
Rubber Case Protectors (RCP)
Laser Marking (LM)
Stainless Steel Tagging (ST)
Gauge Fill Options
Silicone (SL)
Halocarbon (HL)
-40 Degree Service (GY40)
Mineral Oil (MO)
Certificates
Certified Calibration (CC)
Cleaning for Oxygen Service (O2), Up to 1000 psi
Cleaning for Oxygen Service (O2), 1500 psi and up
±1.6% Full Scale
NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.
<ul><li>Chrome Adaptor Ring (25-13-1-CHROME-AR)</li><li>Rubber Case Protector (25-123459-0-RCP)</li><li>Certificate of Cleaning (COCL)</li><li>Certificate of Conformance (COC)</li></ul>
Dynamic Pressure The working pressure should be limited to 60% of the dial range
Static Pressure The working pressure, where no sharp fluctuations occur, should be limited to 90% of the dial range
Dual scale metric dials in psi/bar, psi/kPa and psi/kg/cm2
Other scales are available for specific sizes and ranges, such as single scale bar and kPa, refrigerant scales and altitude scales
Customized special dials such as non-standard metric scale, tons of ram, lbs. of force, etc. are available in small quantities (as few as one piece) on some NOSHOK gauges
Please consult the factory for availability.
Glycerin or silicone could result in a spontaneous chemical reaction or explosion when combined with strong oxidizing agents including, but not limited to, chlorine, oxygen, hydrochloric or nitric acid, and hydrogen peroxide. Do not use glycerin or silicone filled gauges or accessories in these types of service. Consult factory for application assistance.
This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
Pressure Gauge
Balanced Aluminum, Black Finish
psi/bar Dual Scale
2-1/2
1/4" NPT
Bottom
Glycerin
0 to 3,000
Aluminum, white background with black scale. UV resistant.
Brass and Nickel-Silver with Highly Polished Bearing Surfaces
1/4" NPT
300
Brass, Bottom Connection
Die Cast Brass (Natural Brass Finish) with Safety Relief Plug
Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.
Automotive
Construction
Hydraulics & pneumatics
Mining
Stamping & forming presses
Transportation
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
The pressure gauges must be operated within the following working pressure limits:
Dynamic Pressure application, 60% of the dial range
Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range
The gauges must be operated within specified ambient temperature ranges
Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
3
NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.
Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
102-MFB, 1/4" National Pipe Thread (NPT), Male x Female, Brass, 0.172" Orifice Hard Seat Mini Valve 102-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, 0.172" Orifice Hard Seat Mini Valve 102-MFS, 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve 602-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, Hard Seat, 0.187" Orifice Block and Bleed Valve
Protect the instrument from the damaging effects of high temperature steam
Recommended for use in all steam applications
Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3800 psi at 850 ºF
0 to 300 psi
NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.
Temperature ratings: 15,000 psi at 200 ºF and 3000 psi at 1000 ºF
Used with gauges and gauge valves to adjust the line of sight
Rotates 360º to allow the connected instrument to be positioned in the desired direction
The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
All 316 Stainless Steel construction
Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
Also available with 1/4" NPT connections, same specifications apply
Weight approximately 0.8 lb.
1/4" NPT
-20 to 60
-4 to 140
0 to 300 psi
Resist clogging and are self-cleaning
Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
Cost effective solution to protect expensive instrumentation
Increases gauge readability by smoothing out pressure surges, pulsations and spikes
5 basic elements available for each snubber to accommodate specific application needs
Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
Exotic materials or intermediate disc grades available
Provides long service life with no moving parts to wear out
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2
Available
Maximum Indicating Pointer (MIP)
Glass Lens Overlay (GLO)
Safety Glass Overlay (SGO)
Chrome Front Flange (CFF)
Chrome Front Flange w/o Holes (CFFN)
Brass Front Flange (BFF)
Rear Flange (RF)
Chrome Cover Ring (CCR)
Increased Accuracy from 1.5% to 1.0% (IA)
SAE J1926-3:7/16-20 Adjustable Connection (SST) Includes FKM O-ring. Consult factory for availability.
10-32-UNF-2B (10-32)
Orifice - Brass Threaded 0.3mm (BT3)
Orifice - Brass Threaded 0.4mm (BT4)
Orifice - Brass Threaded 0.8mm (BT8) - Standard
Rubber Case Protectors (RCP)
Laser Marking (LM)
Stainless Steel Tagging (ST)
Gauge Fill Options
Silicone (SL)
Halocarbon (HL)
-40 Degree Service (GY40)
Mineral Oil (MO)
Certificates
Certified Calibration (CC)
Cleaning for Oxygen Service (O2), Up to 1000 psi
Cleaning for Oxygen Service (O2), 1500 psi and up
±1.6% Full Scale
NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.
<ul><li>Chrome Adaptor Ring (25-13-1-CHROME-AR)</li><li>Rubber Case Protector (25-123459-0-RCP)</li><li>Certificate of Cleaning (COCL)</li><li>Certificate of Conformance (COC)</li></ul>
Dynamic Pressure The working pressure should be limited to 60% of the dial range
Static Pressure The working pressure, where no sharp fluctuations occur, should be limited to 90% of the dial range
Dual scale metric dials in psi/bar, psi/kPa and psi/kg/cm2
Other scales are available for specific sizes and ranges, such as single scale bar and kPa, refrigerant scales and altitude scales
Customized special dials such as non-standard metric scale, tons of ram, lbs. of force, etc. are available in small quantities (as few as one piece) on some NOSHOK gauges
Please consult the factory for availability.
Glycerin or silicone could result in a spontaneous chemical reaction or explosion when combined with strong oxidizing agents including, but not limited to, chlorine, oxygen, hydrochloric or nitric acid, and hydrogen peroxide. Do not use glycerin or silicone filled gauges or accessories in these types of service. Consult factory for application assistance.
This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
Pressure Gauge
Balanced Aluminum, Black Finish
psi Single Scale
2-1/2
1/4" NPT
Bottom
Glycerin
0 to 300
Aluminum, white background with black scale. UV resistant.
Brass and Nickel-Silver with Highly Polished Bearing Surfaces
1/4" NPT
300
Brass, Bottom Connection
Die Cast Brass (Natural Brass Finish) with Safety Relief Plug
Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.
Automotive
Construction
Hydraulics & pneumatics
Mining
Stamping & forming presses
Transportation
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
The pressure gauges must be operated within the following working pressure limits:
Dynamic Pressure application, 60% of the dial range
Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range
The gauges must be operated within specified ambient temperature ranges
Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
3
NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.
Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
102-MFB, 1/4" National Pipe Thread (NPT), Male x Female, Brass, 0.172" Orifice Hard Seat Mini Valve 102-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, 0.172" Orifice Hard Seat Mini Valve 102-MFS, 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve 602-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, Hard Seat, 0.187" Orifice Block and Bleed Valve
Protect the instrument from the damaging effects of high temperature steam
Recommended for use in all steam applications
Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3800 psi at 850 ºF
0 to 30 psi
NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.
Temperature ratings: 15,000 psi at 200 ºF and 3000 psi at 1000 ºF
Used with gauges and gauge valves to adjust the line of sight
Rotates 360º to allow the connected instrument to be positioned in the desired direction
The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
All 316 Stainless Steel construction
Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
Also available with 1/4" NPT connections, same specifications apply
Weight approximately 0.8 lb.
1/4" NPT
-20 to 60
-4 to 140
0 to 30 psi
Resist clogging and are self-cleaning
Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
Cost effective solution to protect expensive instrumentation
Increases gauge readability by smoothing out pressure surges, pulsations and spikes
5 basic elements available for each snubber to accommodate specific application needs
Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
Exotic materials or intermediate disc grades available
Provides long service life with no moving parts to wear out
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2
Available
Maximum Indicating Pointer (MIP)
Glass Lens Overlay (GLO)
Safety Glass Overlay (SGO)
Chrome Front Flange (CFF)
Chrome Front Flange w/o Holes (CFFN)
Brass Front Flange (BFF)
Rear Flange (RF)
Chrome Cover Ring (CCR)
Increased Accuracy from 1.5% to 1.0% (IA)
SAE J1926-3:7/16-20 Adjustable Connection (SST) Includes FKM O-ring. Consult factory for availability.
10-32-UNF-2B (10-32)
Orifice - Brass Threaded 0.3mm (BT3)
Orifice - Brass Threaded 0.4mm (BT4)
Orifice - Brass Threaded 0.8mm (BT8) - Standard
Rubber Case Protectors (RCP)
Laser Marking (LM)
Stainless Steel Tagging (ST)
Gauge Fill Options
Silicone (SL)
Halocarbon (HL)
-40 Degree Service (GY40)
Mineral Oil (MO)
Certificates
Certified Calibration (CC)
Cleaning for Oxygen Service (O2), Up to 1000 psi
Cleaning for Oxygen Service (O2), 1500 psi and up
±1.6% Full Scale
NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.
<ul><li>Chrome Adaptor Ring (25-13-1-CHROME-AR)</li><li>Rubber Case Protector (25-123459-0-RCP)</li><li>Certificate of Cleaning (COCL)</li><li>Certificate of Conformance (COC)</li></ul>
Dynamic Pressure The working pressure should be limited to 60% of the dial range
Static Pressure The working pressure, where no sharp fluctuations occur, should be limited to 90% of the dial range
Dual scale metric dials in psi/bar, psi/kPa and psi/kg/cm2
Other scales are available for specific sizes and ranges, such as single scale bar and kPa, refrigerant scales and altitude scales
Customized special dials such as non-standard metric scale, tons of ram, lbs. of force, etc. are available in small quantities (as few as one piece) on some NOSHOK gauges
Please consult the factory for availability.
Glycerin or silicone could result in a spontaneous chemical reaction or explosion when combined with strong oxidizing agents including, but not limited to, chlorine, oxygen, hydrochloric or nitric acid, and hydrogen peroxide. Do not use glycerin or silicone filled gauges or accessories in these types of service. Consult factory for application assistance.
This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
Pressure Gauge
Balanced Aluminum, Black Finish
psi Single Scale
2-1/2
1/4" NPT
Bottom
Glycerin
0 to 30
Aluminum, white background with black scale. UV resistant.
Brass and Nickel-Silver with Highly Polished Bearing Surfaces
1/4" NPT
300
Brass, Bottom Connection
Die Cast Brass (Natural Brass Finish) with Safety Relief Plug
Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.
Automotive
Construction
Hydraulics & pneumatics
Mining
Stamping & forming presses
Transportation
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
The pressure gauges must be operated within the following working pressure limits:
Dynamic Pressure application, 60% of the dial range
Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range
The gauges must be operated within specified ambient temperature ranges
Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
3
NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.
Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
102-MFB, 1/4" National Pipe Thread (NPT), Male x Female, Brass, 0.172" Orifice Hard Seat Mini Valve 102-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, 0.172" Orifice Hard Seat Mini Valve 102-MFS, 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve 602-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, Hard Seat, 0.187" Orifice Block and Bleed Valve
Protect the instrument from the damaging effects of high temperature steam
Recommended for use in all steam applications
Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3800 psi at 850 ºF
0 to 30 psi
NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.
Temperature ratings: 15,000 psi at 200 ºF and 3000 psi at 1000 ºF
Used with gauges and gauge valves to adjust the line of sight
Rotates 360º to allow the connected instrument to be positioned in the desired direction
The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
All 316 Stainless Steel construction
Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
Also available with 1/4" NPT connections, same specifications apply
Weight approximately 0.8 lb.
1/4" NPT
-20 to 60
-4 to 140
0 to 30 psi
Resist clogging and are self-cleaning
Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
Cost effective solution to protect expensive instrumentation
Increases gauge readability by smoothing out pressure surges, pulsations and spikes
5 basic elements available for each snubber to accommodate specific application needs
Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
Exotic materials or intermediate disc grades available
Provides long service life with no moving parts to wear out
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2
Available
Maximum Indicating Pointer (MIP)
Glass Lens Overlay (GLO)
Safety Glass Overlay (SGO)
Chrome Front Flange (CFF)
Chrome Front Flange w/o Holes (CFFN)
Brass Front Flange (BFF)
Rear Flange (RF)
Chrome Cover Ring (CCR)
Increased Accuracy from 1.5% to 1.0% (IA)
SAE J1926-3:7/16-20 Adjustable Connection (SST) Includes FKM O-ring. Consult factory for availability.
10-32-UNF-2B (10-32)
Orifice - Brass Threaded 0.3mm (BT3)
Orifice - Brass Threaded 0.4mm (BT4)
Orifice - Brass Threaded 0.8mm (BT8) - Standard
Rubber Case Protectors (RCP)
Laser Marking (LM)
Stainless Steel Tagging (ST)
Gauge Fill Options
Silicone (SL)
Halocarbon (HL)
-40 Degree Service (GY40)
Mineral Oil (MO)
Certificates
Certified Calibration (CC)
Cleaning for Oxygen Service (O2), Up to 1000 psi
Cleaning for Oxygen Service (O2), 1500 psi and up
±1.6% Full Scale
NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.
<ul><li>Chrome Adaptor Ring (25-13-1-CHROME-AR)</li><li>Rubber Case Protector (25-123459-0-RCP)</li><li>Certificate of Cleaning (COCL)</li><li>Certificate of Conformance (COC)</li></ul>
Dynamic Pressure The working pressure should be limited to 60% of the dial range
Static Pressure The working pressure, where no sharp fluctuations occur, should be limited to 90% of the dial range
Dual scale metric dials in psi/bar, psi/kPa and psi/kg/cm2
Other scales are available for specific sizes and ranges, such as single scale bar and kPa, refrigerant scales and altitude scales
Customized special dials such as non-standard metric scale, tons of ram, lbs. of force, etc. are available in small quantities (as few as one piece) on some NOSHOK gauges
Please consult the factory for availability.
Glycerin or silicone could result in a spontaneous chemical reaction or explosion when combined with strong oxidizing agents including, but not limited to, chlorine, oxygen, hydrochloric or nitric acid, and hydrogen peroxide. Do not use glycerin or silicone filled gauges or accessories in these types of service. Consult factory for application assistance.
This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
Pressure Gauge
Balanced Aluminum, Black Finish
bar Scale
2-1/2
1/4" NPT
Bottom
Glycerin
0 to 30
Aluminum, white background with black scale. UV resistant.
Brass and Nickel-Silver with Highly Polished Bearing Surfaces
1/4" NPT
300
Brass, Bottom Connection
Die Cast Brass (Natural Brass Finish) with Safety Relief Plug
Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.
Automotive
Construction
Hydraulics & pneumatics
Mining
Stamping & forming presses
Transportation
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
The pressure gauges must be operated within the following working pressure limits:
Dynamic Pressure application, 60% of the dial range
Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range
The gauges must be operated within specified ambient temperature ranges
Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
3
NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.
Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
102-MFB, 1/4" National Pipe Thread (NPT), Male x Female, Brass, 0.172" Orifice Hard Seat Mini Valve 102-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, 0.172" Orifice Hard Seat Mini Valve 102-MFS, 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve 602-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, Hard Seat, 0.187" Orifice Block and Bleed Valve
Protect the instrument from the damaging effects of high temperature steam
Recommended for use in all steam applications
Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3800 psi at 850 ºF
0 to 400 psi
NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.
Temperature ratings: 15,000 psi at 200 ºF and 3000 psi at 1000 ºF
Used with gauges and gauge valves to adjust the line of sight
Rotates 360º to allow the connected instrument to be positioned in the desired direction
The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
All 316 Stainless Steel construction
Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
Also available with 1/4" NPT connections, same specifications apply
Weight approximately 0.8 lb.
1/4" NPT
-20 to 60
-4 to 140
0 to 400 psi
Resist clogging and are self-cleaning
Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
Cost effective solution to protect expensive instrumentation
Increases gauge readability by smoothing out pressure surges, pulsations and spikes
5 basic elements available for each snubber to accommodate specific application needs
Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
Exotic materials or intermediate disc grades available
Provides long service life with no moving parts to wear out
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2
Available
Maximum Indicating Pointer (MIP)
Glass Lens Overlay (GLO)
Safety Glass Overlay (SGO)
Chrome Front Flange (CFF)
Chrome Front Flange w/o Holes (CFFN)
Brass Front Flange (BFF)
Rear Flange (RF)
Chrome Cover Ring (CCR)
Increased Accuracy from 1.5% to 1.0% (IA)
SAE J1926-3:7/16-20 Adjustable Connection (SST) Includes FKM O-ring. Consult factory for availability.
10-32-UNF-2B (10-32)
Orifice - Brass Threaded 0.3mm (BT3)
Orifice - Brass Threaded 0.4mm (BT4)
Orifice - Brass Threaded 0.8mm (BT8) - Standard
Rubber Case Protectors (RCP)
Laser Marking (LM)
Stainless Steel Tagging (ST)
Gauge Fill Options
Silicone (SL)
Halocarbon (HL)
-40 Degree Service (GY40)
Mineral Oil (MO)
Certificates
Certified Calibration (CC)
Cleaning for Oxygen Service (O2), Up to 1000 psi
Cleaning for Oxygen Service (O2), 1500 psi and up
±1.6% Full Scale
NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.
<ul><li>Chrome Adaptor Ring (25-13-1-CHROME-AR)</li><li>Rubber Case Protector (25-123459-0-RCP)</li><li>Certificate of Cleaning (COCL)</li><li>Certificate of Conformance (COC)</li></ul>
Dynamic Pressure The working pressure should be limited to 60% of the dial range
Static Pressure The working pressure, where no sharp fluctuations occur, should be limited to 90% of the dial range
Dual scale metric dials in psi/bar, psi/kPa and psi/kg/cm2
Other scales are available for specific sizes and ranges, such as single scale bar and kPa, refrigerant scales and altitude scales
Customized special dials such as non-standard metric scale, tons of ram, lbs. of force, etc. are available in small quantities (as few as one piece) on some NOSHOK gauges
Please consult the factory for availability.
Glycerin or silicone could result in a spontaneous chemical reaction or explosion when combined with strong oxidizing agents including, but not limited to, chlorine, oxygen, hydrochloric or nitric acid, and hydrogen peroxide. Do not use glycerin or silicone filled gauges or accessories in these types of service. Consult factory for application assistance.
This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
Pressure Gauge
Balanced Aluminum, Black Finish
psi Single Scale
2-1/2
1/4" NPT
Bottom
Glycerin
0 to 400
Aluminum, white background with black scale. UV resistant.
Brass and Nickel-Silver with Highly Polished Bearing Surfaces
1/4" NPT
300
Brass, Bottom Connection
Die Cast Brass (Natural Brass Finish) with Safety Relief Plug
Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.
Automotive
Construction
Hydraulics & pneumatics
Mining
Stamping & forming presses
Transportation
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
The pressure gauges must be operated within the following working pressure limits:
Dynamic Pressure application, 60% of the dial range
Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range
The gauges must be operated within specified ambient temperature ranges
Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
3
NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.
Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
102-MFB, 1/4" National Pipe Thread (NPT), Male x Female, Brass, 0.172" Orifice Hard Seat Mini Valve 102-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, 0.172" Orifice Hard Seat Mini Valve 102-MFS, 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve 602-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, Hard Seat, 0.187" Orifice Block and Bleed Valve
Protect the instrument from the damaging effects of high temperature steam
Recommended for use in all steam applications
Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3800 psi at 850 ºF
0 to 5,000 psi
NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.
Temperature ratings: 15,000 psi at 200 ºF and 3000 psi at 1000 ºF
Used with gauges and gauge valves to adjust the line of sight
Rotates 360º to allow the connected instrument to be positioned in the desired direction
The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
All 316 Stainless Steel construction
Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
Also available with 1/4" NPT connections, same specifications apply
Weight approximately 0.8 lb.
1/4" NPT
-20 to 60
-4 to 140
0 to 5,000 psi
Resist clogging and are self-cleaning
Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
Cost effective solution to protect expensive instrumentation
Increases gauge readability by smoothing out pressure surges, pulsations and spikes
5 basic elements available for each snubber to accommodate specific application needs
Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
Exotic materials or intermediate disc grades available
Provides long service life with no moving parts to wear out
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2
Available
Maximum Indicating Pointer (MIP)
Glass Lens Overlay (GLO)
Safety Glass Overlay (SGO)
Chrome Front Flange (CFF)
Chrome Front Flange w/o Holes (CFFN)
Brass Front Flange (BFF)
Rear Flange (RF)
Chrome Cover Ring (CCR)
Increased Accuracy from 1.5% to 1.0% (IA)
SAE J1926-3:7/16-20 Adjustable Connection (SST) Includes FKM O-ring. Consult factory for availability.
10-32-UNF-2B (10-32)
Orifice - Brass Threaded 0.3mm (BT3)
Orifice - Brass Threaded 0.4mm (BT4)
Orifice - Brass Threaded 0.8mm (BT8) - Standard
Rubber Case Protectors (RCP)
Laser Marking (LM)
Stainless Steel Tagging (ST)
Gauge Fill Options
Silicone (SL)
Halocarbon (HL)
-40 Degree Service (GY40)
Mineral Oil (MO)
Certificates
Certified Calibration (CC)
Cleaning for Oxygen Service (O2), Up to 1000 psi
Cleaning for Oxygen Service (O2), 1500 psi and up
±1.6% Full Scale
NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.
<ul><li>Chrome Adaptor Ring (25-13-1-CHROME-AR)</li><li>Rubber Case Protector (25-123459-0-RCP)</li><li>Certificate of Cleaning (COCL)</li><li>Certificate of Conformance (COC)</li></ul>
Dynamic Pressure The working pressure should be limited to 60% of the dial range
Static Pressure The working pressure, where no sharp fluctuations occur, should be limited to 90% of the dial range
Dual scale metric dials in psi/bar, psi/kPa and psi/kg/cm2
Other scales are available for specific sizes and ranges, such as single scale bar and kPa, refrigerant scales and altitude scales
Customized special dials such as non-standard metric scale, tons of ram, lbs. of force, etc. are available in small quantities (as few as one piece) on some NOSHOK gauges
Please consult the factory for availability.
Glycerin or silicone could result in a spontaneous chemical reaction or explosion when combined with strong oxidizing agents including, but not limited to, chlorine, oxygen, hydrochloric or nitric acid, and hydrogen peroxide. Do not use glycerin or silicone filled gauges or accessories in these types of service. Consult factory for application assistance.
This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
Pressure Gauge
Balanced Aluminum, Black Finish
psi Single Scale
2-1/2
1/4" NPT
Bottom
Glycerin
0 to 5,000
Aluminum, white background with black scale. UV resistant.
Brass and Nickel-Silver with Highly Polished Bearing Surfaces
1/4" NPT
300
Brass, Bottom Connection
Die Cast Brass (Natural Brass Finish) with Safety Relief Plug
Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.
Automotive
Construction
Hydraulics & pneumatics
Mining
Stamping & forming presses
Transportation
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
The pressure gauges must be operated within the following working pressure limits:
Dynamic Pressure application, 60% of the dial range
Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range
The gauges must be operated within specified ambient temperature ranges
Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
3
NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.
Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
102-MFB, 1/4" National Pipe Thread (NPT), Male x Female, Brass, 0.172" Orifice Hard Seat Mini Valve 102-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, 0.172" Orifice Hard Seat Mini Valve 102-MFS, 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve 602-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, Hard Seat, 0.187" Orifice Block and Bleed Valve
Protect the instrument from the damaging effects of high temperature steam
Recommended for use in all steam applications
Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3800 psi at 850 ºF
0 to 5,000 psi
NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.
Temperature ratings: 15,000 psi at 200 ºF and 3000 psi at 1000 ºF
Used with gauges and gauge valves to adjust the line of sight
Rotates 360º to allow the connected instrument to be positioned in the desired direction
The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
All 316 Stainless Steel construction
Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
Also available with 1/4" NPT connections, same specifications apply
Weight approximately 0.8 lb.
1/4" NPT
-20 to 60
-4 to 140
0 to 5,000 psi
Resist clogging and are self-cleaning
Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
Cost effective solution to protect expensive instrumentation
Increases gauge readability by smoothing out pressure surges, pulsations and spikes
5 basic elements available for each snubber to accommodate specific application needs
Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
Exotic materials or intermediate disc grades available
Provides long service life with no moving parts to wear out
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2
Available
Maximum Indicating Pointer (MIP)
Glass Lens Overlay (GLO)
Safety Glass Overlay (SGO)
Chrome Front Flange (CFF)
Chrome Front Flange w/o Holes (CFFN)
Brass Front Flange (BFF)
Rear Flange (RF)
Chrome Cover Ring (CCR)
Increased Accuracy from 1.5% to 1.0% (IA)
SAE J1926-3:7/16-20 Adjustable Connection (SST) Includes FKM O-ring. Consult factory for availability.
10-32-UNF-2B (10-32)
Orifice - Brass Threaded 0.3mm (BT3)
Orifice - Brass Threaded 0.4mm (BT4)
Orifice - Brass Threaded 0.8mm (BT8) - Standard
Rubber Case Protectors (RCP)
Laser Marking (LM)
Stainless Steel Tagging (ST)
Gauge Fill Options
Silicone (SL)
Halocarbon (HL)
-40 Degree Service (GY40)
Mineral Oil (MO)
Certificates
Certified Calibration (CC)
Cleaning for Oxygen Service (O2), Up to 1000 psi
Cleaning for Oxygen Service (O2), 1500 psi and up
±1.6% Full Scale
NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.
<ul><li>Chrome Adaptor Ring (25-13-1-CHROME-AR)</li><li>Rubber Case Protector (25-123459-0-RCP)</li><li>Certificate of Cleaning (COCL)</li><li>Certificate of Conformance (COC)</li></ul>
Dynamic Pressure The working pressure should be limited to 60% of the dial range
Static Pressure The working pressure, where no sharp fluctuations occur, should be limited to 90% of the dial range
Dual scale metric dials in psi/bar, psi/kPa and psi/kg/cm2
Other scales are available for specific sizes and ranges, such as single scale bar and kPa, refrigerant scales and altitude scales
Customized special dials such as non-standard metric scale, tons of ram, lbs. of force, etc. are available in small quantities (as few as one piece) on some NOSHOK gauges
Please consult the factory for availability.
Glycerin or silicone could result in a spontaneous chemical reaction or explosion when combined with strong oxidizing agents including, but not limited to, chlorine, oxygen, hydrochloric or nitric acid, and hydrogen peroxide. Do not use glycerin or silicone filled gauges or accessories in these types of service. Consult factory for application assistance.
This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
Pressure Gauge
Balanced Aluminum, Black Finish
psi/bar Dual Scale
2-1/2
1/4" NPT
Bottom
Glycerin
0 to 5,000
Aluminum, white background with black scale. UV resistant.
Brass and Nickel-Silver with Highly Polished Bearing Surfaces
1/4" NPT
300
Brass, Bottom Connection
Die Cast Brass (Natural Brass Finish) with Safety Relief Plug
Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.
Automotive
Construction
Hydraulics & pneumatics
Mining
Stamping & forming presses
Transportation
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
The pressure gauges must be operated within the following working pressure limits:
Dynamic Pressure application, 60% of the dial range
Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range
The gauges must be operated within specified ambient temperature ranges
Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
3
NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.
Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
102-MFB, 1/4" National Pipe Thread (NPT), Male x Female, Brass, 0.172" Orifice Hard Seat Mini Valve 102-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, 0.172" Orifice Hard Seat Mini Valve 102-MFS, 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve 602-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, Hard Seat, 0.187" Orifice Block and Bleed Valve
Protect the instrument from the damaging effects of high temperature steam
Recommended for use in all steam applications
Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3800 psi at 850 ºF
0 to 6,000 psi
NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.
Temperature ratings: 15,000 psi at 200 ºF and 3000 psi at 1000 ºF
Used with gauges and gauge valves to adjust the line of sight
Rotates 360º to allow the connected instrument to be positioned in the desired direction
The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
All 316 Stainless Steel construction
Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
Also available with 1/4" NPT connections, same specifications apply
Weight approximately 0.8 lb.
1/4" NPT
-20 to 60
-4 to 140
0 to 6,000 psi
Resist clogging and are self-cleaning
Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
Cost effective solution to protect expensive instrumentation
Increases gauge readability by smoothing out pressure surges, pulsations and spikes
5 basic elements available for each snubber to accommodate specific application needs
Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
Exotic materials or intermediate disc grades available
Provides long service life with no moving parts to wear out
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2
Available
Maximum Indicating Pointer (MIP)
Glass Lens Overlay (GLO)
Safety Glass Overlay (SGO)
Chrome Front Flange (CFF)
Chrome Front Flange w/o Holes (CFFN)
Brass Front Flange (BFF)
Rear Flange (RF)
Chrome Cover Ring (CCR)
Increased Accuracy from 1.5% to 1.0% (IA)
SAE J1926-3:7/16-20 Adjustable Connection (SST) Includes FKM O-ring. Consult factory for availability.
10-32-UNF-2B (10-32)
Orifice - Brass Threaded 0.3mm (BT3)
Orifice - Brass Threaded 0.4mm (BT4)
Orifice - Brass Threaded 0.8mm (BT8) - Standard
Rubber Case Protectors (RCP)
Laser Marking (LM)
Stainless Steel Tagging (ST)
Gauge Fill Options
Silicone (SL)
Halocarbon (HL)
-40 Degree Service (GY40)
Mineral Oil (MO)
Certificates
Certified Calibration (CC)
Cleaning for Oxygen Service (O2), Up to 1000 psi
Cleaning for Oxygen Service (O2), 1500 psi and up
±1.6% Full Scale
NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.
<ul><li>Chrome Adaptor Ring (25-13-1-CHROME-AR)</li><li>Rubber Case Protector (25-123459-0-RCP)</li><li>Certificate of Cleaning (COCL)</li><li>Certificate of Conformance (COC)</li></ul>
Dynamic Pressure The working pressure should be limited to 60% of the dial range
Static Pressure The working pressure, where no sharp fluctuations occur, should be limited to 90% of the dial range
Dual scale metric dials in psi/bar, psi/kPa and psi/kg/cm2
Other scales are available for specific sizes and ranges, such as single scale bar and kPa, refrigerant scales and altitude scales
Customized special dials such as non-standard metric scale, tons of ram, lbs. of force, etc. are available in small quantities (as few as one piece) on some NOSHOK gauges
Please consult the factory for availability.
Glycerin or silicone could result in a spontaneous chemical reaction or explosion when combined with strong oxidizing agents including, but not limited to, chlorine, oxygen, hydrochloric or nitric acid, and hydrogen peroxide. Do not use glycerin or silicone filled gauges or accessories in these types of service. Consult factory for application assistance.
This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
Pressure Gauge
Balanced Aluminum, Black Finish
psi Single Scale
2-1/2
1/4" NPT
Bottom
Glycerin
0 to 6,000
Aluminum, white background with black scale. UV resistant.
Brass and Nickel-Silver with Highly Polished Bearing Surfaces
1/4" NPT
300
Brass, Bottom Connection
Die Cast Brass (Natural Brass Finish) with Safety Relief Plug
Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.
Automotive
Construction
Hydraulics & pneumatics
Mining
Stamping & forming presses
Transportation
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
The pressure gauges must be operated within the following working pressure limits:
Dynamic Pressure application, 60% of the dial range
Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range
The gauges must be operated within specified ambient temperature ranges
Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
3
NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.
Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
102-MFB, 1/4" National Pipe Thread (NPT), Male x Female, Brass, 0.172" Orifice Hard Seat Mini Valve 102-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, 0.172" Orifice Hard Seat Mini Valve 102-MFS, 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve 602-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, Hard Seat, 0.187" Orifice Block and Bleed Valve
Protect the instrument from the damaging effects of high temperature steam
Recommended for use in all steam applications
Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3800 psi at 850 ºF
0 to 600 psi
NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.
Temperature ratings: 15,000 psi at 200 ºF and 3000 psi at 1000 ºF
Used with gauges and gauge valves to adjust the line of sight
Rotates 360º to allow the connected instrument to be positioned in the desired direction
The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
All 316 Stainless Steel construction
Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
Also available with 1/4" NPT connections, same specifications apply
Weight approximately 0.8 lb.
1/4" NPT
-20 to 60
-4 to 140
0 to 600 psi
Resist clogging and are self-cleaning
Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
Cost effective solution to protect expensive instrumentation
Increases gauge readability by smoothing out pressure surges, pulsations and spikes
5 basic elements available for each snubber to accommodate specific application needs
Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
Exotic materials or intermediate disc grades available
Provides long service life with no moving parts to wear out
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2
Available
Maximum Indicating Pointer (MIP)
Glass Lens Overlay (GLO)
Safety Glass Overlay (SGO)
Chrome Front Flange (CFF)
Chrome Front Flange w/o Holes (CFFN)
Brass Front Flange (BFF)
Rear Flange (RF)
Chrome Cover Ring (CCR)
Increased Accuracy from 1.5% to 1.0% (IA)
SAE J1926-3:7/16-20 Adjustable Connection (SST) Includes FKM O-ring. Consult factory for availability.
10-32-UNF-2B (10-32)
Orifice - Brass Threaded 0.3mm (BT3)
Orifice - Brass Threaded 0.4mm (BT4)
Orifice - Brass Threaded 0.8mm (BT8) - Standard
Rubber Case Protectors (RCP)
Laser Marking (LM)
Stainless Steel Tagging (ST)
Gauge Fill Options
Silicone (SL)
Halocarbon (HL)
-40 Degree Service (GY40)
Mineral Oil (MO)
Certificates
Certified Calibration (CC)
Cleaning for Oxygen Service (O2), Up to 1000 psi
Cleaning for Oxygen Service (O2), 1500 psi and up
±1.6% Full Scale
NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.
<ul><li>Chrome Adaptor Ring (25-13-1-CHROME-AR)</li><li>Rubber Case Protector (25-123459-0-RCP)</li><li>Certificate of Cleaning (COCL)</li><li>Certificate of Conformance (COC)</li></ul>
Dynamic Pressure The working pressure should be limited to 60% of the dial range
Static Pressure The working pressure, where no sharp fluctuations occur, should be limited to 90% of the dial range
Dual scale metric dials in psi/bar, psi/kPa and psi/kg/cm2
Other scales are available for specific sizes and ranges, such as single scale bar and kPa, refrigerant scales and altitude scales
Customized special dials such as non-standard metric scale, tons of ram, lbs. of force, etc. are available in small quantities (as few as one piece) on some NOSHOK gauges
Please consult the factory for availability.
Glycerin or silicone could result in a spontaneous chemical reaction or explosion when combined with strong oxidizing agents including, but not limited to, chlorine, oxygen, hydrochloric or nitric acid, and hydrogen peroxide. Do not use glycerin or silicone filled gauges or accessories in these types of service. Consult factory for application assistance.
This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
Pressure Gauge
Balanced Aluminum, Black Finish
psi Single Scale
2-1/2
1/4" NPT
Bottom
Glycerin
0 to 600
Aluminum, white background with black scale. UV resistant.
Brass and Nickel-Silver with Highly Polished Bearing Surfaces
1/4" NPT
300
Brass, Bottom Connection
Die Cast Brass (Natural Brass Finish) with Safety Relief Plug
Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.
Automotive
Construction
Hydraulics & pneumatics
Mining
Stamping & forming presses
Transportation
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
The pressure gauges must be operated within the following working pressure limits:
Dynamic Pressure application, 60% of the dial range
Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range
The gauges must be operated within specified ambient temperature ranges
Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
3
NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.
Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
102-MFB, 1/4" National Pipe Thread (NPT), Male x Female, Brass, 0.172" Orifice Hard Seat Mini Valve 102-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, 0.172" Orifice Hard Seat Mini Valve 102-MFS, 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve 602-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, Hard Seat, 0.187" Orifice Block and Bleed Valve
Protect the instrument from the damaging effects of high temperature steam
Recommended for use in all steam applications
Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3800 psi at 850 ºF
0 to 600 psi
NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.
Temperature ratings: 15,000 psi at 200 ºF and 3000 psi at 1000 ºF
Used with gauges and gauge valves to adjust the line of sight
Rotates 360º to allow the connected instrument to be positioned in the desired direction
The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
All 316 Stainless Steel construction
Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
Also available with 1/4" NPT connections, same specifications apply
Weight approximately 0.8 lb.
1/4" NPT
-20 to 60
-4 to 140
0 to 600 psi
Resist clogging and are self-cleaning
Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
Cost effective solution to protect expensive instrumentation
Increases gauge readability by smoothing out pressure surges, pulsations and spikes
5 basic elements available for each snubber to accommodate specific application needs
Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
Exotic materials or intermediate disc grades available
Provides long service life with no moving parts to wear out
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2
Available
Maximum Indicating Pointer (MIP)
Glass Lens Overlay (GLO)
Safety Glass Overlay (SGO)
Chrome Front Flange (CFF)
Chrome Front Flange w/o Holes (CFFN)
Brass Front Flange (BFF)
Rear Flange (RF)
Chrome Cover Ring (CCR)
Increased Accuracy from 1.5% to 1.0% (IA)
SAE J1926-3:7/16-20 Adjustable Connection (SST) Includes FKM O-ring. Consult factory for availability.
10-32-UNF-2B (10-32)
Orifice - Brass Threaded 0.3mm (BT3)
Orifice - Brass Threaded 0.4mm (BT4)
Orifice - Brass Threaded 0.8mm (BT8) - Standard
Rubber Case Protectors (RCP)
Laser Marking (LM)
Stainless Steel Tagging (ST)
Gauge Fill Options
Silicone (SL)
Halocarbon (HL)
-40 Degree Service (GY40)
Mineral Oil (MO)
Certificates
Certified Calibration (CC)
Cleaning for Oxygen Service (O2), Up to 1000 psi
Cleaning for Oxygen Service (O2), 1500 psi and up
±1.6% Full Scale
NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.
<ul><li>Chrome Adaptor Ring (25-13-1-CHROME-AR)</li><li>Rubber Case Protector (25-123459-0-RCP)</li><li>Certificate of Cleaning (COCL)</li><li>Certificate of Conformance (COC)</li></ul>
Dynamic Pressure The working pressure should be limited to 60% of the dial range
Static Pressure The working pressure, where no sharp fluctuations occur, should be limited to 90% of the dial range
Dual scale metric dials in psi/bar, psi/kPa and psi/kg/cm2
Other scales are available for specific sizes and ranges, such as single scale bar and kPa, refrigerant scales and altitude scales
Customized special dials such as non-standard metric scale, tons of ram, lbs. of force, etc. are available in small quantities (as few as one piece) on some NOSHOK gauges
Please consult the factory for availability.
Glycerin or silicone could result in a spontaneous chemical reaction or explosion when combined with strong oxidizing agents including, but not limited to, chlorine, oxygen, hydrochloric or nitric acid, and hydrogen peroxide. Do not use glycerin or silicone filled gauges or accessories in these types of service. Consult factory for application assistance.
This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
Pressure Gauge
Balanced Aluminum, Black Finish
psi/bar Dual Scale
2-1/2
1/4" NPT
Bottom
Glycerin
0 to 600
Aluminum, white background with black scale. UV resistant.
Brass and Nickel-Silver with Highly Polished Bearing Surfaces
1/4" NPT
300
Brass, Bottom Connection
Die Cast Brass (Natural Brass Finish) with Safety Relief Plug
Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.
Automotive
Construction
Hydraulics & pneumatics
Mining
Stamping & forming presses
Transportation
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
The pressure gauges must be operated within the following working pressure limits:
Dynamic Pressure application, 60% of the dial range
Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range
The gauges must be operated within specified ambient temperature ranges
Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
3
NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.
Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.
102-MFB, 1/4" National Pipe Thread (NPT), Male x Female, Brass, 0.172" Orifice Hard Seat Mini Valve 102-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, 0.172" Orifice Hard Seat Mini Valve 102-MFS, 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve 602-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, Hard Seat, 0.187" Orifice Block and Bleed Valve
Protect the instrument from the damaging effects of high temperature steam
Recommended for use in all steam applications
Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3800 psi at 850 ºF
0 to 7,500 psi
NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.
Temperature ratings: 15,000 psi at 200 ºF and 3000 psi at 1000 ºF
Used with gauges and gauge valves to adjust the line of sight
Rotates 360º to allow the connected instrument to be positioned in the desired direction
The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
All 316 Stainless Steel construction
Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
Also available with 1/4" NPT connections, same specifications apply
Weight approximately 0.8 lb.
1/4" NPT
-20 to 60
-4 to 140
0 to 7,500 psi
Resist clogging and are self-cleaning
Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
Cost effective solution to protect expensive instrumentation
Increases gauge readability by smoothing out pressure surges, pulsations and spikes
5 basic elements available for each snubber to accommodate specific application needs
Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
Exotic materials or intermediate disc grades available
Provides long service life with no moving parts to wear out
Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2
Available
Maximum Indicating Pointer (MIP)
Glass Lens Overlay (GLO)
Safety Glass Overlay (SGO)
Chrome Front Flange (CFF)
Chrome Front Flange w/o Holes (CFFN)
Brass Front Flange (BFF)
Rear Flange (RF)
Chrome Cover Ring (CCR)
Increased Accuracy from 1.5% to 1.0% (IA)
SAE J1926-3:7/16-20 Adjustable Connection (SST) Includes FKM O-ring. Consult factory for availability.
10-32-UNF-2B (10-32)
Orifice - Brass Threaded 0.3mm (BT3)
Orifice - Brass Threaded 0.4mm (BT4)
Orifice - Brass Threaded 0.8mm (BT8) - Standard
Rubber Case Protectors (RCP)
Laser Marking (LM)
Stainless Steel Tagging (ST)
Gauge Fill Options
Silicone (SL)
Halocarbon (HL)
-40 Degree Service (GY40)
Mineral Oil (MO)
Certificates
Certified Calibration (CC)
Cleaning for Oxygen Service (O2), Up to 1000 psi
Cleaning for Oxygen Service (O2), 1500 psi and up
±1.6% Full Scale
NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.
<ul><li>Chrome Adaptor Ring (25-13-1-CHROME-AR)</li><li>Rubber Case Protector (25-123459-0-RCP)</li><li>Certificate of Cleaning (COCL)</li><li>Certificate of Conformance (COC)</li></ul>
Dynamic Pressure The working pressure should be limited to 60% of the dial range
Static Pressure The working pressure, where no sharp fluctuations occur, should be limited to 90% of the dial range
Dual scale metric dials in psi/bar, psi/kPa and psi/kg/cm2
Other scales are available for specific sizes and ranges, such as single scale bar and kPa, refrigerant scales and altitude scales
Customized special dials such as non-standard metric scale, tons of ram, lbs. of force, etc. are available in small quantities (as few as one piece) on some NOSHOK gauges
Please consult the factory for availability.
Glycerin or silicone could result in a spontaneous chemical reaction or explosion when combined with strong oxidizing agents including, but not limited to, chlorine, oxygen, hydrochloric or nitric acid, and hydrogen peroxide. Do not use glycerin or silicone filled gauges or accessories in these types of service. Consult factory for application assistance.
This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
Pressure Gauge
Balanced Aluminum, Black Finish
psi Single Scale
2-1/2
1/4" NPT
Bottom
Glycerin
0 to 7,500
Aluminum, white background with black scale. UV resistant.
Brass and Nickel-Silver with Highly Polished Bearing Surfaces
1/4" NPT
300
Brass, Bottom Connection
Die Cast Brass (Natural Brass Finish) with Safety Relief Plug
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
