| UOM | EA | Seal Material | Nitrile |
| Maximum Inlet Pressure Rating | 5000 PSI, 350 BAR | Configuration | Floating Center |
| Override Functionality | Detented | Flow Rate | 2.7, 4 GAL/MIN, 10, 15 L/MIN |
| Seal Material | Nitrile | Body Material | n/a |
| Maximum Operating Pressure | 5000 psi | Division | Hydraulic Systems Division |
| Maximum Kinematic Viscosity | 45-2000 SSU (6 to 420 cSt) | Minimum Operating Temperature | -34 °C |
| Weight | 0.15 kg | Maximum Inlet Pressure Rating | 350 bar |
| Installation Torque | 22 lb-ft | Coil Nut Tightening Torque | 3 lb-ft |
| Cavity Size | C08-4 | Actuation Type | Electrical, Manual |
| Maximum Operating Temperature | +250 °F | Filter Efficiency Rating | ISO 4406 18/16/13, SAE Class 4 |
| Frequency | 100-400 Hz | For Fluid Type | Mineral-based or synthetic hydraulic fluids |
| Operation Type | Solenoid operated, Manually operated | Valve Material | All parts steel. All operating parts hardened steel |
| Operating Temperature | -30 to +250 °F | Configuration | Floating Center |
| Coil Type | 1/2" Super Coil | Response Time | 50 ms |
| Maximum Tank Pressure | 210 bar | Function | Proportional Directional Control |
| Leak Rate | 10 @ 3000 PSI (210 BAR) cm3/min | Hysteresis | Less than 6% |
| Flow Rate Accuracy | +/- 15% @ 75% Nominal Current and Constant DeltaP Maintained with Pressure Compensator | Variation of Opening Point | 25% - 30% of Input Signal |
| Current | 1.15 @ 12 VDC, 1.58 @ 12 VDC, 0.58 @ 24 VDC, 0.79 @ 24 VDC A | Flow Rate | 10, 15 L/min |
| Maximum Flow Rate | 10, 15 L/min | Power Consumption | 14, 19 W |
| Override Functionality | Detented | | |
