300 Series Mechanical Compact Single Pole Double Throw (SPDT) Pressure Switches with Adjustable Hysteresis

Picture for category 300 Series Mechanical Compact Single Pole Double Throw (SPDT) Pressure Switches with Adjustable Hysteresis

*PRODUCT IMAGE IS REPRESENTATIVE PROVIDED BY THE MANUFACTURER. DO NOT MAKE BUYING DECISIONS SOLEY BASED ON THE IMAGE. PLEASE VERIFY SPECIFICATIONS MEET YOUR REQUIREMENTS.

Switch adjustment ranges from vacuum through 4,600 psig
Standard Zinc-nickel with NBR diaphragm wetted parts
SPST or SPDT snap-action switch with solid Silver contacts
CE compliant to suppress Radio Frequency Interference (RFI), Electromagnetic Interference (EMI) and Electrostatic Discharge (ESD)
RoHS compliant

View as Grid List

Sort by

Display per page

Action	SKU	Availability	Partner Available	Price	UOM	Application	Prop 65 Warnings	Limitations Which Apply Are	Warranty_yr	Distribution Manifolds	Steam Syphons	Swivel Adapters	Media Temperature Range_ºC	Media Temperature Range_ºF	Pressure Snubbers - Piston Type	Pressure Snubbers - Sintered Type	Measuring Element	Service Life	Contact Rating	Mechanical Switches Options & Accessories	Weight_lb	Environmental Rating	Type	Process Connection	Ambient Temperature Range_ºC	Ambient Temperature Range_ºF	Housing Material	Process Connection Size_in	Switching Function	Electrical Connection	Series	Hysteresis	Switch Type	Switch Point	Contact Material	Non-Repeatability	Proof Pressure_psig	Switch Adjustable Range
	300H-3-2-145/1160-8	Backordered	Backordered	$99.38/each	EA	Hydraulics & pneumatics Pumps & compressors Tank monitoring Leak detection Water management	WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov	These units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.	1	NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.	Protect the instrument from the damaging effects of high temperature steam Recommended for use in all steam applications Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3,800 psi at 850 ºF	Temperature ratings: 15,000 psi at 200 ºF and 3,000 psi at 1,000 ºF Used with gauges and gauge valves to adjust the line of sight Rotates 360º to allow the connected instrument to be positioned in the desired direction The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut All 316 Stainless Steel construction Standard with 1/2" NPT male process - 1/2" NPT female instrument connections Also available with 1/4" NPT connections, same specifications apply Weight approximately 0.8 lb.	-20 to 80	-4 to 176	Resist clogging and are self-cleaning Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20 Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"	Cost effective solution to protect expensive instrumentation Increases gauge readability by smoothing out pressure surges, pulsations and spikes 5 basic elements available for each snubber to accommodate specific application needs Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element Exotic materials or intermediate disc grades available Provides long service life with no moving parts to wear out Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2	NBR	< 1,000,000 Load Cycles	6A @ 12/24 Vdc 6A @ 125/250 Vac	Factory Adjusted Switch Point (Specify)	0.2	Ingress Protection (IP65)	Mechanical Switch	1/4" NPT Male	-20 to 80	-4 to 176	Zinc-Nickel Plated Steel	1/4	SPDT	DIN EN 175301-803 Form A	300	Adjustable	Snap Action with Adjustable Hysteresis	Field Adjustable and/or Factory Set	Solid Silver, Self-Cleaning	2% of Full Set Point Range at 70 ºF	870 to 5,000	145 to 1,160 psig
	300H-3-2-145/1750-8	Backordered	Backordered	$99.38/each	EA	Hydraulics & pneumatics Pumps & compressors Tank monitoring Leak detection Water management	WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov	These units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.	1	NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.	Protect the instrument from the damaging effects of high temperature steam Recommended for use in all steam applications Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3,800 psi at 850 ºF	Temperature ratings: 15,000 psi at 200 ºF and 3,000 psi at 1,000 ºF Used with gauges and gauge valves to adjust the line of sight Rotates 360º to allow the connected instrument to be positioned in the desired direction The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut All 316 Stainless Steel construction Standard with 1/2" NPT male process - 1/2" NPT female instrument connections Also available with 1/4" NPT connections, same specifications apply Weight approximately 0.8 lb.	-20 to 80	-4 to 176	Resist clogging and are self-cleaning Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20 Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"	Cost effective solution to protect expensive instrumentation Increases gauge readability by smoothing out pressure surges, pulsations and spikes 5 basic elements available for each snubber to accommodate specific application needs Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element Exotic materials or intermediate disc grades available Provides long service life with no moving parts to wear out Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2	NBR	< 1,000,000 Load Cycles	6A @ 12/24 Vdc 6A @ 125/250 Vac	Factory Adjusted Switch Point (Specify)	0.2	Ingress Protection (IP65)	Mechanical Switch	1/4" NPT Male	-20 to 80	-4 to 176	Zinc-Nickel Plated Steel	1/4	SPDT	DIN EN 175301-803 Form A	300	Adjustable	Snap Action with Adjustable Hysteresis	Field Adjustable and/or Factory Set	Solid Silver, Self-Cleaning	2% of Full Set Point Range at 70 ºF	870 to 5,000	145 to 1,750 psig
	300H-3-2-300/2900-8	Backordered	Backordered	$99.38/each	EA	Hydraulics & pneumatics Pumps & compressors Tank monitoring Leak detection Water management	WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov	These units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.	1	NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.	Protect the instrument from the damaging effects of high temperature steam Recommended for use in all steam applications Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3,800 psi at 850 ºF	Temperature ratings: 15,000 psi at 200 ºF and 3,000 psi at 1,000 ºF Used with gauges and gauge valves to adjust the line of sight Rotates 360º to allow the connected instrument to be positioned in the desired direction The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut All 316 Stainless Steel construction Standard with 1/2" NPT male process - 1/2" NPT female instrument connections Also available with 1/4" NPT connections, same specifications apply Weight approximately 0.8 lb.	-20 to 80	-4 to 176	Resist clogging and are self-cleaning Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20 Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"	Cost effective solution to protect expensive instrumentation Increases gauge readability by smoothing out pressure surges, pulsations and spikes 5 basic elements available for each snubber to accommodate specific application needs Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element Exotic materials or intermediate disc grades available Provides long service life with no moving parts to wear out Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2	NBR	< 1,000,000 Load Cycles	6A @ 12/24 Vdc 6A @ 125/250 Vac	Factory Adjusted Switch Point (Specify)	0.2	Ingress Protection (IP65)	Mechanical Switch	1/4" NPT Male	-20 to 80	-4 to 176	Zinc-Nickel Plated Steel	1/4	SPDT	DIN EN 175301-803 Form A	300	Adjustable	Snap Action with Adjustable Hysteresis	Field Adjustable and/or Factory Set	Solid Silver, Self-Cleaning	2% of Full Set Point Range at 70 ºF	870 to 5,000	300 to 2,900 psig
	300H-3-2-300/3600-25	Backordered	Backordered	$135.10/each	EA	Hydraulics & pneumatics Pumps & compressors Tank monitoring Leak detection Water management	WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov	These units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.	1	NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.	Protect the instrument from the damaging effects of high temperature steam Recommended for use in all steam applications Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3,800 psi at 850 ºF	Temperature ratings: 15,000 psi at 200 ºF and 3,000 psi at 1,000 ºF Used with gauges and gauge valves to adjust the line of sight Rotates 360º to allow the connected instrument to be positioned in the desired direction The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut All 316 Stainless Steel construction Standard with 1/2" NPT male process - 1/2" NPT female instrument connections Also available with 1/4" NPT connections, same specifications apply Weight approximately 0.8 lb.	-20 to 80	-4 to 176	Resist clogging and are self-cleaning Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20 Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"	Cost effective solution to protect expensive instrumentation Increases gauge readability by smoothing out pressure surges, pulsations and spikes 5 basic elements available for each snubber to accommodate specific application needs Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element Exotic materials or intermediate disc grades available Provides long service life with no moving parts to wear out Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2	NBR	< 1,000,000 Load Cycles	6A @ 12/24 Vdc 6A @ 125/250 Vac	Factory Adjusted Switch Point (Specify)	0.2	Ingress Protection (IP67)	Mechanical Switch	1/4" NPT Male	-20 to 80	-4 to 176	Zinc-Nickel Plated Steel	1/4	SPDT	M12 x 1 4-Pin	300	Adjustable	Snap Action with Adjustable Hysteresis	Field Adjustable and/or Factory Set	Solid Silver, Self-Cleaning	2% of Full Set Point Range at 70 ºF	870 to 5,000	300 to 3,600 psig