| UOM | EA | Note | Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information. |
| Application | - Automotive
- Construction
- Hydraulics & pneumatics
- Mining
- Stamping & forming presses
- Transportation
| Prop 65 Warnings |  WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
| Limitations Which Apply Are | - Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage
- The pressure gauges must be operated within the following working pressure limits:
- Dynamic Pressure application, 60% of the dial range
- Static Pressure applications, where no sharp fluctuations occur, 90% of the dial range
- The gauges must be operated within specified ambient temperature ranges
- Determination of gauge failures will be made by NOSHOK, Inc., which will use its equipment and personnel or a certified test facility specializing in this type of evaluation and determination. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abuse will not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge without cost to the customer. This written warranty applies only to the NOSHOK gauges referenced in the first paragraph of this warranty, sold by NOSHOK, Inc. and its authorized distributors.
| Warranty_yr | 3 |
| Distribution Manifolds | NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths. | Caution | Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.
In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice. |
| Related Items | 102-MFB, 1/4" National Pipe Thread (NPT), Male x Female, Brass, 0.172" Orifice Hard Seat Mini Valve 102-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, 0.172" Orifice Hard Seat Mini Valve 102-MFS, 1/4" National Pipe Thread (NPT), Male x Female, 316 Stainless Steel, 0.172" Orifice Hard Seat Mini Valve 602-MFC, 1/4" National Pipe Thread (NPT), Male x Female, Steel, Hard Seat, 0.187" Orifice Block and Bleed Valve | Steam Syphons | - Protect the instrument from the damaging effects of high temperature steam
- Recommended for use in all steam applications
- Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3800 psi at 850 ºF
|
| Pressure Range | 0 to 160 psi | Diaphragm Seals | NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media. |
| Swivel Adapters | - Temperature ratings: 15,000 psi at 200 ºF and 3000 psi at 1000 ºF
- Used with gauges and gauge valves to adjust the line of sight
- Rotates 360º to allow the connected instrument to be positioned in the desired direction
- The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut
- All 316 Stainless Steel construction
- Standard with 1/2" NPT male process - 1/2" NPT female instrument connections
- Also available with 1/4" NPT connections, same specifications apply
- Weight approximately 0.8 lb.
| Process Connection Size | 1/4" NPT |
| Media Temperature Range_ºC | -20 to 60 | Media Temperature Range_ºF | -4 to 140 |
| Pressure Range (Search only) | 0 to 160 psi | Pressure Snubbers - Piston Type | - Resist clogging and are self-cleaning
- Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application
- Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20
- Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"
|
| Pressure Snubbers - Sintered Type | - Cost effective solution to protect expensive instrumentation
- Increases gauge readability by smoothing out pressure surges, pulsations and spikes
- 5 basic elements available for each snubber to accommodate specific application needs
- Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element
- Exotic materials or intermediate disc grades available
- Provides long service life with no moving parts to wear out
- Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2
| Installed Options and Accessories | Available- Maximum Indicating Pointer (MIP)
- Glass Lens Overlay (GLO)
- Safety Glass Overlay (SGO)
- Chrome Front Flange (CFF)
- Chrome Front Flange w/o Holes (CFFN)
- Brass Front Flange (BFF)
- Rear Flange (RF)
- Chrome Cover Ring (CCR)
- Increased Accuracy from 1.5% to 1.0% (IA)
- SAE J1926-3:7/16-20 Adjustable Connection (SST) Includes FKM O-ring. Consult factory for availability.
- 10-32-UNF-2B (10-32)
- Orifice - Brass Threaded 0.3mm (BT3)
- Orifice - Brass Threaded 0.4mm (BT4)
- Orifice - Brass Threaded 0.8mm (BT8) - Standard
- Rubber Case Protectors (RCP)
- Laser Marking (LM)
- Stainless Steel Tagging (ST)
Gauge Fill Options- Silicone (SL)
- Halocarbon (HL)
- -40 Degree Service (GY40)
- Mineral Oil (MO)
Certificates- Certified Calibration (CC)
- Cleaning for Oxygen Service (O2), Up to 1000 psi
- Cleaning for Oxygen Service (O2), 1500 psi and up
|
| Accuracy | ±1.6% Full Scale | Assembly Options | NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution. |
| Measuring Element | Copper Alloy "C" Tube | Uninstalled Options and Accessories | <ul><li>Chrome Adaptor Ring (25-13-1-CHROME-AR)</li><li>Rubber Case Protector (25-123459-0-RCP)</li><li>Certificate of Cleaning (COCL)</li><li>Certificate of Conformance (COC)</li></ul> |
| Working Pressure Limitations | Dynamic Pressure
The working pressure should be limited to 60% of the dial range
Static Pressure
The working pressure, where no sharp fluctuations occur, should be limited to 90% of the dial range | Metric Dials and Customized Special Dials | - Dual scale metric dials in psi/bar, psi/kPa and psi/kg/cm2
- Other scales are available for specific sizes and ranges, such as single scale bar and kPa, refrigerant scales and altitude scales
- Customized special dials such as non-standard metric scale, tons of ram, lbs. of force, etc. are available in small quantities (as few as one piece) on some NOSHOK gauges
Please consult the factory for availability. |
| Warnings | Glycerin or silicone could result in a spontaneous chemical reaction or explosion when combined with strong oxidizing agents including, but not limited to, chlorine, oxygen, hydrochloric or nitric acid, and hydrogen peroxide. Do not use glycerin or silicone filled gauges or accessories in these types of service. Consult factory for application assistance.
This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. | Type | Pressure Gauge |
| Pointer | Balanced Aluminum, Black Finish | Scale Option | psi Single Scale |
| Gauge Size_in | 2-1/2 | Pressure Range_psi | 0 to 160 |
| Connection Location | Back | Process Connection | 1/4" NPT |
| Fill Liquid | Glycerin | Dial | Aluminum, white background with black scale. UV resistant. |
| Movement | Brass and Nickel-Silver with Highly Polished Bearing Surfaces | Joint Connection | 1/4" NPT |
| Series | 300 | Case Material | Die Cast Brass (Natural Brass Finish) with Safety Relief Plug |
| Lens/Display Material | Acrylic with O-Ring Seal | Ambient Temperature Range_ºC | -18 to 71 |
| Ambient Temperature Range_ºF | 0 to 160 | Cover Ring Material | Polished Brass |
| Case Type | Brass, Back Connection | | |
